|
#1
07-02-2004, 03:50
|
|||
|
|||
|
Flashed BIOS using Evox - XBOX Won't boot HELP !!!
Just updated my executer 2 lite BIOS with 4981.06 (cause I just got xbox live and wanted to stop it connecting by mistake with the chip on!) using the flash bios utility in Evox. Everything seemed to go fine but when I rebooted after the update my xbox flashes red and green.
It makes no difference if i switch the chip on or off - still the same no boot and FRAG. Also tried to boot with an older ISO CD-RW which is what i used to put evox on in the first place - doesn't work. Do I have a way out of this or have I killed my executer 2 (or xbox?) Tried looking elsewhere in the forums for an answer but can't seem to find one Any help appreciated!! 
|
| Sponsored Links |
|
#2
07-02-2004, 12:15
|
||||
|
||||
|
did u get the bios from xbins? or some other site?
__________________
~WoMeNlOvEr ... so far ive moddded xboxes with: 2 Matrixes 3 Xbits My xbox!: -250 gig -XBIT -4981.06 x2 -orange led for light, matching beautifully with the orange x in the splash screen -Component cable my problem...solved?!: -one of my friends says he can get about 450 files off it!... and now i havent seen him for about 4 months..and ive written him like 11 emails.. WHERE THE HELL IS HE?! :mad: [B]OWNED! <3 TylerDurden![/B]
|
|
#3
07-02-2004, 12:58
|
|||
|
|||
|
Thanks for the suggestions - BIOS from xbox-tribe.net - must be dodgy !!!
Is a programmer simple to use or is it easier just to buy another chip? Also would removing the chip make my xbox go back to its original state??
|
|
#4
07-02-2004, 19:57
|
||||
|
||||
|
yea programmers are pretty simple..
uhh u gotta remove the chip from the box goto xbins to get ur bios next time... if nothin physically is harmed on the xbox, yea itll be fine and go back to its normal state, whichi s probably the case
__________________
~WoMeNlOvEr ... so far ive moddded xboxes with: 2 Matrixes 3 Xbits My xbox!: -250 gig -XBIT -4981.06 x2 -orange led for light, matching beautifully with the orange x in the splash screen -Component cable my problem...solved?!: -one of my friends says he can get about 450 files off it!... and now i havent seen him for about 4 months..and ive written him like 11 emails.. WHERE THE HELL IS HE?! :mad: [B]OWNED! <3 TylerDurden![/B]
|
|
#5
07-02-2004, 23:09
|
||||
|
||||
|
If your XBox frags when the chip is off, some thing is wrong with yoru XBox not the chip. Check all your solder points.
__________________
[SIZE=1]NTSC Ver1.0 XBox w/ [URL=http://www.gameshopusa.com/]X2.3 Lite[/URL] flashed with X2 4981.06 120GB WD 7200RPM 8mg cache Samsung SDG-605B * All stuffed in a beautiful translucent green case UK PAL Ver1.4 XBox ([i]not chipped yet[/i]) Stock 8gb WD Philips 6035/21 * All stuffed in a beautiful Crystal Clear case[/SIZE] [I]Having a BMW that says “Made in the USA” is like having a Rolls-Royce that says “Made in Japan”[/I]
|
|
#6
08-02-2004, 08:44
|
||||
|
||||
|
can u turn the x2 off?
cuz i think its still tryin to load the corrupt bios disable the d0 point maybe?
__________________
~WoMeNlOvEr ... so far ive moddded xboxes with: 2 Matrixes 3 Xbits My xbox!: -250 gig -XBIT -4981.06 x2 -orange led for light, matching beautifully with the orange x in the splash screen -Component cable my problem...solved?!: -one of my friends says he can get about 450 files off it!... and now i havent seen him for about 4 months..and ive written him like 11 emails.. WHERE THE HELL IS HE?! :mad: [B]OWNED! <3 TylerDurden![/B]
|
|
#7
09-02-2004, 02:16
|
||||
|
||||
|
got mine from tribe....x2 lite and flashed with evox...everythings fine so it might be your xbox
__________________
v7 w/ messiah 2 pro v1.30 v7 w/ messiah 2 pro v1.30 v1.6 with duox2 and 200gb wd HD
|
 |
|
|
Linear Mode
