|
#1
|
||||
|
||||
|
DiskSpan GUI SFX builder
![]() ![]() ![]() No full installers, no multi-step setup wizards, and no clutter. You get a single, clean window: Destination path -> Extract. KEY FEATURES Single EXE Format Easily extracts data from your DiskSpan GUI archives. Automatic Script Reading Reads Records.ini directly out of Setup.dll (or from a separate Records.ini next to the data). Data File Renaming Give Data1a-01.bin any name you like; Records.ini is updated automatically. Customizable Customize icons, background artwork (BMP format with auto-dimming), fonts, and dimensions. Batch / Silent Mode Full support for command-line switches like /AUTO and /OUT="...". Multi-Language Support Supports .ini language files in the languages\ folder. All-in-One Portable Inno Setup and the DSG module are included, nothing to install. WHERE TO PUT IT (DIRECTORY STRUCTURE) Important: The _SFX_Builder folder must sit NEXT TO the COMPRESSOR folder of your DiskSpan GUI installation. It detects everything else automatically. Correct directory layout: Code:
DiskSpan_GUI v2.0.2.5
├── COMPRESSOR
│ ├── Conversion_Output\CONVERSION\ <- Default source (Data*.bin, Setup.dll)
│ └── Resources\Win64\Arc.exe <- Reads Records.ini out of Setup.dll
└── _SFX_Builder\ <- PUT IT HERE
├── _Script Example (DSG)\Include\DSG\ <- DSG module (unpacking engine, included)
├── IS_Files\ <- Portable Inno Setup (ISCC.exe)
├── languages\ <- Language files (EN.ini, PL.ini)
├── Setup\ <- Graphics & Icons (BG.bmp, ico.ico)
├── Templates\Unpacker.iss
├── Build SFX.bat
├── Build-SFX.ps1
└── config.toml
Configure your desired settings in config.toml (name, title, target extraction folder, background image, icon, data file name, etc.). Double-click "Build SFX.bat". The completed Unpacker.exe will land in Conversion_Output\CONVERSION (right next to your archive data). To extract: Run Unpacker.exe it must sit in the same folder as the Data*.bin files. CONFIGURATION (config.toml) The main configuration file. Relative paths are resolved against the _SFX_Builder folder: Section "sfx": name = Base name of the resulting EXE (without extension) title = Window title bar text version / publisher = EXE file metadata language = Auto (from Windows) or forced code: EN, PL Section "window": width / height = Window size in logical units Section "appearance": background = Window background image (BMP format only) background_dim = Background dimming percentage (range 0100) font_name / font_size = Window font name and size in points icon = EXE icon file (.ico) Section "output": folder = Destination folder offered in the SFX window Section "data": name = New name for the data file (e.g. "Data.bin"); empty = keep Data1a-01.bin Section "unpack": low_ram = Check "Limit RAM and CPU usage" by default close_after = Check "Close after extraction" by default ask_open_folder = Show "open this folder?" prompt when done admin = Request administrator privileges (recommended: true) dll_password = Setup.dll password (if set) embed_dll = Embed Setup.dll directly into the EXE CHANGES LOG v1.04 - Compatibility with DiskSpan GUI v2.0.2.5 _SFX_Builder now sits next to COMPRESSOR. - DSG module (_Script Example (DSG)) is now included. - New: [data] name rename the data file; Records.ini Source= is updated and embedded in the EXE. - Fixed: reading Records.ini from Setup.dll when the TEMP folder is not writable. v1.03 - Initial release. Related project DiskSpan GUI by Cesar82 Last edited by sajmon83; 14-11-2026 at 16:03. Reason: v1.04 |
| The Following 5 Users Say Thank You to sajmon83 For This Useful Post: | ||
Cesar82 (04-08-2026), Dunnowho69 (27-08-2026), KaktoR (Yesterday), kj911 (14-11-2026), ScOOt3r (01-08-2026) | ||
| Sponsored Links |
|
#2
|
||||
|
||||
|
CHANGES LOG
v1.04 - Compatibility with DiskSpan GUI v2.0.2.5 — _SFX_Builder now sits next to COMPRESSOR. - DSG module (_Script Example (DSG)) is now included. - New: [data] name — rename the data file; Records.ini Source= is updated and embedded in the EXE. - Fixed: reading Records.ini from Setup.dll when the TEMP folder is not writable. |
|
#3
|
||||
|
||||
|
I like the project.
Its interesting to see someone else developing a script compatible with DSG. However, I believe the project needs a few adjustments to improve it. The output folder in DSG is configurable. The default is DISK_1 (or simply DISK if there is only one medium); it only becomes "CONVERSION" when the UNLIMITED tab is selected. Since the purpose of DiskSpan GUI (DSG) is to create multi-disk sets, the path handling should be compatible with this. Because DSG stores its settings in an external file, you could read the INI file to determine the correct path. You can read the `DSG_Settings.ini` file located in the "COMPRESSOR\Resources" folder. Read ini: [CommonSettings] >> OutputPath= + \ + [CommonSettings] >> DiskLabel= + 1 (if not exist remove "_1" from patch and verify again) Even so, there is still a minor issue. Your output folder for the "unpacker.exe" executable is "Conversion_Output\CONVERSION" (or potentially "Conversion_Output\DISK_1" / "Conversion_Output\DISK"), but DSG must first generate the `DATA.bin` files before you can create your "unpacker.exe". Furthermore, DSG requires the "unpacker.exe" to be present in the `Setup_Files` folder so that it can determine its file size, perform calculations, and reserve the necessary space to include "unpacker.exe" on the first disk. It would be possible to generate the "setup.dll" first, create your "unpacker.exe", and place it into the "Setup_Files" folderbut this would require the target medium/method to have been selected beforehand. For these "DISKSPAN" reasons, DSG uses an external Setup.dll containing the decompressors. This is because if you choose the DVD5 option and generate your unpacker.exe afterward, you probably won't be able to burn it onto a DVD5 disc unless you reserve some space on the first disc, for example, 20 MB. Last edited by Cesar82; Yesterday at 22:10. |
| The Following User Says Thank You to Cesar82 For This Useful Post: | ||
sajmon83 (Today) | ||
|
#4
|
||||
|
||||
|
DSG 2.0.2.5 beta 3 HF - the /dll switch fails for some XTool options.
"/dll=x.dll /method=xtool:mzlib:dd" and "/method=xtool:mzlib:mzstd" create no DLL and show "Runtime Error: Could not call proc" or "An attempt was made to access WizardForm before it has been created". xtool:mzlib:mpreflate, uelr, srep_new:490g and rofz work fine. Both failing ones are the entries with {fake:...} placeholders in [Decomp.XT_Dedup] and [Decomp.XT_ZSTD], so the ParamFakes expansion probably touches WizardForm in /dll mode. PS:"rofz" is my own compressor that I'm currently working on :P Last edited by sajmon83; Today at 08:17. |
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DiskSpan GUI | Cesar82 | Conversion Tutorials | 538 | 14-11-2026 13:00 |
| How to use Diskspan GUI v2+ | mausschieber | Conversion Tutorials | 53 | 13-11-2026 11:04 |
| Windows Phone Installer (bug free) | bunti_o4u | Conversion Tutorials | 257 | 10-09-2026 11:43 |
| How to use diskspan bat | mausschieber | Conversion Tutorials | 13 | 14-01-2026 20:20 |
| How to use DiskSpan BAT | mausschieber | Conversion Tutorials | 5 | 09-07-2021 02:59 |