Toca Race driver 3 won't work with images

[Synbiote]

True..but it would still find the mounting software(Daemon tools) and wil not run the game. not even using anti blacklist software

[henry]

Originally Posted by Synbiote

True..but it would still find the mounting software(Daemon tools) and wil not run the game. not even using anti blacklist software

I'm not using Daemon tools, I'm not using any anti-blacklisting software or anything to hide drives, nothing but the game.

Just pop the disk in the drive and it works.
It must be an RW and if it doesn't work in the drive connected via IDE, then a drive mounted in a USB2 caddie, either way still no hiding or disconnecting.

[Synbiote]

alright..will try it tonight.. it's a RW..so it wouldn't hurt
thx for the help so far

[henry]

Method using Alcohol, you may need to change speeds depending on your system hardware.

Creating an image.
Click the 'Image Making Wizard' button.
Click in the 'Data Position Measurement' box and select 'High', Next.
Choose your destination and image name then click 'Start', choose 'Maximum' for measuring speed(you may need to select a much lower speed depending on hardware) then 'OK'.

Burning image.
Click the 'Image Burning Wizard' button.
Browse to where the image is, click next.
Now click in the 'Burn "RMPS" to recordable Media' box and select max speed for writing (again you may need to slow it down depending on hardware) then click 'Start'.

I have burned 8X DVD+RW (Ricoh) at 8X and the disk worked.

My system Specs
Nforce 4 mobo
Pioneer 110 connected to IDE
Pioneer 106 connected via USB 2 caddie
Maxtor SATA II HDD
Intel Pentium 840 D
2GB 667 DDRII

[Synbiote]

I tried burning it as you specified and it doesn't even try looking for a disk in my drivebays >_<.. he immediatly gives me the error:

Insert the RaceDriver3 (keyless) disk into another drive then press retry

when i mount an image and try opening it then.. he checks the disk for about 3 seconds and then gives that same error >_<

sys specs:

Nforce 4 mobo : msi K8n neo-F 4
BENQ DVD DW1640
bunch of Sata hdd's
AMD athlon XP64 3700+ San Diego
1 gig 400Mhz DDR

[werky]

Helo guys!

I have bypass the starforce 3.7 used in toca 3.This is how to do it:

-install virtual drive pro 10
-install dt 4.03 (the latest)

-start vcd manager (right click on the vd pro icon in the right bottom of the screen and click on "vcd manager"
-under tools click on disable IDE CD-rom
-load image with dt 4.03
-play!!

O,dont ask me for my pc spec,i dont know them,i can just say its not nforce mb,and that i have P4 1,7

[alibaba126]

Originally Posted by werky

Helo guys!

I have bypass the starforce 3.7 used in toca 3.This is how to do it:

-install virtual drive pro 10
-install dt 4.03 (the latest)

-start vcd manager (right click on the vd pro icon in the right bottom of the screen and click on "vcd manager"
-under tools click on disable IDE CD-rom
-load image with dt 4.03
-play!!

O,dont ask me for my pc spec,i dont know them,i can just say its not nforce mb,and that i have P4 1,7

I tried the same earlier, didn't work for me. I get this message, please insert disc in the right drive blabla

[Synbiote]

Originally Posted by werky

Helo guys!
I have bypass the starforce 3.7 used in toca 3.This is how to do it:
-install virtual drive pro 10
-install dt 4.03 (the latest)
-start vcd manager (right click on the vd pro icon in the right bottom of the screen and click on "vcd manager"
-under tools click on disable IDE CD-rom
-load image with dt 4.03
-play!!

thx ..this seems to work just fine for me.. just the re activation of the drives make my pc hang..but i'm able to live with this for the moment >_<