AR2v2 Limited edition no DVDr booting
 

I have been trying to use the
Dave Mirra BMX too many codes error
to boot up my DVDrs
But I get no Error message....it just boots the game
62 codes active

Have sony changed something (new V5 PS")
Are the Limited editions no good (8meg memory in dongle)
for booting DVDr

any suggestions

The Dave Mirra trick is too convoluted for me to help you other than to say it's time to get the Messia - the best chip for the v5.

Yeah I had that problem on a mates older ps2 with neo 2.2,,

while booting into the AR2 hold "start", "select", "L1","L2","R1","R2" all the way into the main AR2 screen.

this will flash the AR2 dongle from the cd, this makes it factory standard again.....

hope this helps
elkay

Unfortunately
I've been told the latest AR2
is no longe able to boot dvdrs

anyone know where i can download a v1.9 boot disk??

latest version I know of is 2.0.2.......... works for me
:)

elkay

My version is v2.10
and it don't do the error!

you have also missed v2.03
available at the codejunkies site for £10

well that would stop u from doing the error codes trick..maby datel see this as a fix???

I suggest putting a whole heap of extra codes into your "Dave mirra 2 codes" on your AR 2

in other words try and make it error ..



or u could try re-flashing your cartridge from a 2.0.2 disk (all top buttons + start & select, on boot) that would certainly put the right number of codes on the cartridge, but then booting it with 2.0.3 again may not work

hope this helps

:confused:

elkay

its not the dongle

its the boot cd that is different
It no longer gives an error.......
I tried putting in another load of codes
it says error then freezes the ps2..until reset

looks like no way round it
v2.11 also does not work!!!

looks like datel have really cut their own legs off with that update..

So whats the sollution for brand new ps2 buyers???
I have been into this for a while now but friends of mine are getting new consoles soon now that we though the chipping and booting had been worked out...

looks like they call it the messiah for a reason..

the shops in sydney have got stacks of old stock of the AR2 2.0.2..
I suggest you try the retail stores where u live for older stock????? the internet sites are the cheapest sure but that means they sell the most and have the freshest stock levels...

I'm stumped

Elkay

OK
v2.03 is no good for dvdr either

only v2.01 and v2.02
can boot DVDrs

what a complete bummer!!!!!!!!!!!!!!!!!!!!

Get a new Mod chip Neo 4 or Messiah. I would advice to get the Messiah. cos boots everything direct.

Hey guys,i got my AR2 v2 about 6 weeks ago.I dunno what version it is exactly(only that its v2.xx).Im gonna be getting an Origa fitted any day now.My question is do the new AR2's still boot cdr backups,and if so will i be able to boot dvdr's on my origa?.seeing as its only 1 swap with the AR2 and you dont need another dvd originil game to swap(like the all the other swap mods)it should work right?.

Im pretty sure my AR2 is v2.02 or older seeing as i got it 6 weeks ago from a store that hardly anybody shops in(so it could have been there a while).Im just a little paranoid.

Almost forgot,i have a v3.Is this just a problem with the v5's or is it actually the newest AR2?.

most chips use the double swap for
booting dvdrs, AR2 v2.03, v2.1, v2.11
will not allow you to do this
as far as i know only the
messiah will boot DVDr without the double swap!

don't know what version AR2 CD you have??
turn CD upside down
look at writing around the centre on the blus shiny ring
Version number is written there.

Good luck!

Phew!,v2.02 :) .But still i was told the Origa is only 1 swap,it even says it on there website.