Compression Questions

yasitha · #1 03-01-2019, 09:25

Hi guys i have use
*Uerl+srep+lzma* on all files.
Everything is fine, compress perfectly.
But while decompressing.. When bk2 files reach, setup will crash ISDone.dll, unarc.dll unable to extract...
any idea what should i do?

ERROR is

ISDone.dll

An error occurred when unpacking!
Unarc.dll returned an error code 1
ERROR: archive data corrupted (decompression fails)

This is the error massage..

yasitha · #2 03-01-2019, 10:41

Quote:

Originally Posted by doofoo24

I don't know how to Create DATA list Excluded list so i have to use all files for one method...

Simorq · #3 03-01-2019, 11:47

Quote:

Originally Posted by yasitha

I don't know how to Create DATA list Excluded list so i have to use all files for one method...

Code:

FreeArc 0.67 (March 15 2014)  http://freearc.org  March 15 2014
High-performance archiver. Free as well for commercial as for non-commercial use
Usage: Arc command [options...] archive [files... @listfiles...]
Commands:
  a        add files to archive
  c        add comment to archive
  ch       modify archive (recompress, encrypt and so on)
  create   create new archive
  cw       write archive comment to file
  d        delete files from archive
  e        extract files from archive ignoring pathnames
  f        freshen archive
  j        join archives
  k        lock archive
  l        list files in archive
  lb       bare list of files in archive
  lt       technical archive listing
  m        move files and dirs to archive
  mf       move files to archive
  modify   modify archive using +/-/* actions
  r        recover archive using recovery record
  rr       add recovery record to archive
  s        convert archive to SFX
  t        test archive integrity
  u        update files in archive
  v        verbosely list files in archive
  x        extract files from archive
Options:
  --                                        stop processing options
  -ac           --ClearArchiveBit           clear Archive bit on files succesfully (de)archived
  -ad           --adddir                    add arcname to extraction path
  -aeALGORITHM  --encryption=ALGORITHM      encryption ALGORITHM (aes, blowfish, serpent, twofish)
  -agFMT        --autogenerate=FMT          autogenerate archive name with FMT
  -ao           --SelectArchiveBit          select only files with Archive bit set
  -apDIR        --arcpath=DIR               base DIR in archive
  -baMODE       --BrokenArchive=MODE        deal with badly broken archive using MODE
  -cfgFILES     --config=FILES              use configuration FILES (default: arc*.ini)
  -d            --delete                    delete files & dirs after successful archiving
  -df           --delfiles                  delete only files after successful archiving
  -diAMOUNT     --display=AMOUNT            control AMOUNT of information displayed: [hoacmnwrfdtske]*
  -dmMETHOD     --dirmethod=METHOD          compression METHOD for archive directory
  -dpDIR        --diskpath=DIR              base DIR on disk
  -dsORDER      --sort=ORDER                sort files in ORDER
  -ed           --nodirs                    don't add empty dirs to archive
  -envVAR                                   read default options from environment VAR (default: FREEARC)
  -epMODE       --ExcludePath=MODE          Exclude/expand path MODE
  -f            --freshen                   freshen files
  -fn           --fullnames                 match with full names
  -hpPASSWORD   --HeadersPassword=PASSWORD  encrypt/decrypt archive headers and data using PASSWORD
  -iTYPE        --indicator=TYPE            select progress indicator TYPE (0/1/2)
  -ioff         --shutdown                  shutdown computer when operation completed
  -k            --lock                      lock archive
  -kb           --keepbroken                keep broken extracted files
  -kfKEYFILE    --keyfile=KEYFILE           encrypt/decrypt using KEYFILE
  -lcN          --LimitCompMem=N            limit memory usage for compression to N mbytes
  -ldN          --LimitDecompMem=N          limit memory usage for decompression to N mbytes
  -mMETHOD      --method=METHOD             compression METHOD (-m0..-m9, -m1x..-m9x)
  -maLEVEL                                  set filetype detection LEVEL (+/-/1..9)
  -max                                      maximum compression using external precomp, ecm, ppmonstr
  -mc                                       disable compression algorithms (-mcd-, -mc-rep...)
  -mdN          --dictionary=N              set compression dictionary to N mbytes
  -mmMODE       --multimedia=MODE           set multimedia compression to MODE
  -ms           --StoreCompressed           store already compressed files
  -mtTHREADS    --MultiThreaded=THREADS     number of compression THREADS
  -mx                                       maximum internal compression mode
  -nFILESPECS   --include=FILESPECS         include only files matching FILESPECS
  -oMODE        --overwrite=MODE            existing files overwrite MODE (+/-/p)
  -okfKEYFILE   --OldKeyfile=KEYFILE        old KEYFILE used only for decryption
  -opPASSWORD   --OldPassword=PASSWORD      old PASSWORD used only for decryption
  -pPASSWORD    --password=PASSWORD         encrypt/decrypt compressed data using PASSWORD
  -r            --recursive                 recursively collect files
  -rrSIZE       --recovery=SIZE             add recovery information of specified SIZE to archive
  -sGROUPING    --solid=GROUPING            GROUPING for solid compression
  -scCHARSETS   --charset=CHARSETS          CHARSETS used for listfiles and comment files
  -sfxMODULE                                add sfx MODULE ("freearc.sfx" by default)
  -slSIZE       --SizeLess=SIZE             select files smaller than SIZE
  -smSIZE       --SizeMore=SIZE             select files larger than SIZE
  -t            --test                      test archive after operation
  -tTYPE        --type=TYPE                 archive TYPE (arc/zip/rar/...)
  -taTIME       --TimeAfter=TIME            select files modified after specified TIME
  -tbTIME       --TimeBefore=TIME           select files modified before specified TIME
  -tk           --keeptime                  keep original archive time
  -tl           --timetolast                set archive time to latest file
  -tnPERIOD     --TimeNewer=PERIOD          select files newer than specified time PERIOD
  -toPERIOD     --TimeOlder=PERIOD          select files older than specified time PERIOD
  -tpMODE       --pretest=MODE              test archive before operation using MODE
  -u            --update                    update files
  -vSIZE        --volume=SIZE               split archive to volumes each of SIZE bytes
  -wDIRECTORY   --workdir=DIRECTORY         DIRECTORY for temporary files
  -xFILESPECS   --exclude=FILESPECS         exclude FILESPECS from operation
  -y            --yes                       answer Yes to all queries
  -zFILE        --arccmt=FILE               read archive comment from FILE or stdin
                --append                    add new files to the end of archive
                --archive-comment=COMMENT   input archive COMMENT in cmdline
                --bypass=URL                setups proxy bypass list for URL access
                --cache=N                   use N mbytes for read-ahead cache
                --crconly                   save/check CRC, but don't store data
                --create-in-workdir         create archive in workdir and then move to final location
                --dirs                      add empty dirs to archive
                --groups=FILE               name of groups FILE
                --language=FILE             load localisation from FILE
                --logfile=FILE              duplicate all information displayed to this FILE
                --noarcext                  don't add default extension to archive name
                --nodata                    don't store data in archive
                --nodates                   don't store filetimes in archive
                --nodir                     don't write archive directories
                --original=URL              redownload broken parts of archive from the URL
                --pause-before-exit=PAUSE   make a PAUSE just before closing program window
                --print-config              display built-in definitions of compression methods
                --proxy=URL                 setups proxy(s) for URL access
                --queue                     queue operations across multiple FreeArc copies
                --recompress                recompress archive contents
                --save-bad-ranges=FILE      save list of broken archive parts to the FILE
                --sync                      synchronize archive and disk contents
All OK

Exclude Files = [email protected] or -x"*.bik" -x"*.bk2"

Include Files = [email protected] or -n"*.bik" -n"*.bk2"

yasitha · #4 03-01-2019, 12:04

Quote:

Originally Posted by Simorq

Code:

FreeArc 0.67 (March 15 2014)  http://freearc.org  March 15 2014
High-performance archiver. Free as well for commercial as for non-commercial use
Usage: Arc command [options...] archive [files... @listfiles...]
Commands:
  a        add files to archive
  c        add comment to archive
  ch       modify archive (recompress, encrypt and so on)
  create   create new archive
  cw       write archive comment to file
  d        delete files from archive
  e        extract files from archive ignoring pathnames
  f        freshen archive
  j        join archives
  k        lock archive
  l        list files in archive
  lb       bare list of files in archive
  lt       technical archive listing
  m        move files and dirs to archive
  mf       move files to archive
  modify   modify archive using +/-/* actions
  r        recover archive using recovery record
  rr       add recovery record to archive
  s        convert archive to SFX
  t        test archive integrity
  u        update files in archive
  v        verbosely list files in archive
  x        extract files from archive
Options:
  --                                        stop processing options
  -ac           --ClearArchiveBit           clear Archive bit on files succesfully (de)archived
  -ad           --adddir                    add arcname to extraction path
  -aeALGORITHM  --encryption=ALGORITHM      encryption ALGORITHM (aes, blowfish, serpent, twofish)
  -agFMT        --autogenerate=FMT          autogenerate archive name with FMT
  -ao           --SelectArchiveBit          select only files with Archive bit set
  -apDIR        --arcpath=DIR               base DIR in archive
  -baMODE       --BrokenArchive=MODE        deal with badly broken archive using MODE
  -cfgFILES     --config=FILES              use configuration FILES (default: arc*.ini)
  -d            --delete                    delete files & dirs after successful archiving
  -df           --delfiles                  delete only files after successful archiving
  -diAMOUNT     --display=AMOUNT            control AMOUNT of information displayed: [hoacmnwrfdtske]*
  -dmMETHOD     --dirmethod=METHOD          compression METHOD for archive directory
  -dpDIR        --diskpath=DIR              base DIR on disk
  -dsORDER      --sort=ORDER                sort files in ORDER
  -ed           --nodirs                    don't add empty dirs to archive
  -envVAR                                   read default options from environment VAR (default: FREEARC)
  -epMODE       --ExcludePath=MODE          Exclude/expand path MODE
  -f            --freshen                   freshen files
  -fn           --fullnames                 match with full names
  -hpPASSWORD   --HeadersPassword=PASSWORD  encrypt/decrypt archive headers and data using PASSWORD
  -iTYPE        --indicator=TYPE            select progress indicator TYPE (0/1/2)
  -ioff         --shutdown                  shutdown computer when operation completed
  -k            --lock                      lock archive
  -kb           --keepbroken                keep broken extracted files
  -kfKEYFILE    --keyfile=KEYFILE           encrypt/decrypt using KEYFILE
  -lcN          --LimitCompMem=N            limit memory usage for compression to N mbytes
  -ldN          --LimitDecompMem=N          limit memory usage for decompression to N mbytes
  -mMETHOD      --method=METHOD             compression METHOD (-m0..-m9, -m1x..-m9x)
  -maLEVEL                                  set filetype detection LEVEL (+/-/1..9)
  -max                                      maximum compression using external precomp, ecm, ppmonstr
  -mc                                       disable compression algorithms (-mcd-, -mc-rep...)
  -mdN          --dictionary=N              set compression dictionary to N mbytes
  -mmMODE       --multimedia=MODE           set multimedia compression to MODE
  -ms           --StoreCompressed           store already compressed files
  -mtTHREADS    --MultiThreaded=THREADS     number of compression THREADS
  -mx                                       maximum internal compression mode
  -nFILESPECS   --include=FILESPECS         include only files matching FILESPECS
  -oMODE        --overwrite=MODE            existing files overwrite MODE (+/-/p)
  -okfKEYFILE   --OldKeyfile=KEYFILE        old KEYFILE used only for decryption
  -opPASSWORD   --OldPassword=PASSWORD      old PASSWORD used only for decryption
  -pPASSWORD    --password=PASSWORD         encrypt/decrypt compressed data using PASSWORD
  -r            --recursive                 recursively collect files
  -rrSIZE       --recovery=SIZE             add recovery information of specified SIZE to archive
  -sGROUPING    --solid=GROUPING            GROUPING for solid compression
  -scCHARSETS   --charset=CHARSETS          CHARSETS used for listfiles and comment files
  -sfxMODULE                                add sfx MODULE ("freearc.sfx" by default)
  -slSIZE       --SizeLess=SIZE             select files smaller than SIZE
  -smSIZE       --SizeMore=SIZE             select files larger than SIZE
  -t            --test                      test archive after operation
  -tTYPE        --type=TYPE                 archive TYPE (arc/zip/rar/...)
  -taTIME       --TimeAfter=TIME            select files modified after specified TIME
  -tbTIME       --TimeBefore=TIME           select files modified before specified TIME
  -tk           --keeptime                  keep original archive time
  -tl           --timetolast                set archive time to latest file
  -tnPERIOD     --TimeNewer=PERIOD          select files newer than specified time PERIOD
  -toPERIOD     --TimeOlder=PERIOD          select files older than specified time PERIOD
  -tpMODE       --pretest=MODE              test archive before operation using MODE
  -u            --update                    update files
  -vSIZE        --volume=SIZE               split archive to volumes each of SIZE bytes
  -wDIRECTORY   --workdir=DIRECTORY         DIRECTORY for temporary files
  -xFILESPECS   --exclude=FILESPECS         exclude FILESPECS from operation
  -y            --yes                       answer Yes to all queries
  -zFILE        --arccmt=FILE               read archive comment from FILE or stdin
                --append                    add new files to the end of archive
                --archive-comment=COMMENT   input archive COMMENT in cmdline
                --bypass=URL                setups proxy bypass list for URL access
                --cache=N                   use N mbytes for read-ahead cache
                --crconly                   save/check CRC, but don't store data
                --create-in-workdir         create archive in workdir and then move to final location
                --dirs                      add empty dirs to archive
                --groups=FILE               name of groups FILE
                --language=FILE             load localisation from FILE
                --logfile=FILE              duplicate all information displayed to this FILE
                --noarcext                  don't add default extension to archive name
                --nodata                    don't store data in archive
                --nodates                   don't store filetimes in archive
                --nodir                     don't write archive directories
                --original=URL              redownload broken parts of archive from the URL
                --pause-before-exit=PAUSE   make a PAUSE just before closing program window
                --print-config              display built-in definitions of compression methods
                --proxy=URL                 setups proxy(s) for URL access
                --queue                     queue operations across multiple FreeArc copies
                --recompress                recompress archive contents
                --save-bad-ranges=FILE      save list of broken archive parts to the FILE
                --sync                      synchronize archive and disk contents
All OK

Exclude Files = [email protected] or -x"*.bik" -x"*.bk2"

Include Files = [email protected] or -n"*.bik" -n"*.bk2"

Thanks I'll try this tomorrow.
If you have time, please make this sample for me.

I have try Diskspan but can't figure it out how to add Data 3/4/5 so if you can make an sample Plese add 4 data parts. No one need more then 4 data for list..

Thanks again

yasitha · #5 04-01-2019, 21:24

i can't compress bink video when i use bpk or BPK compression going to failed

can anyone please tell me,
what i need to compress bik, bink videos?

arc.ini and dll files for bpk?

oltjon · #6 05-01-2019, 04:23

Quote:

Originally Posted by yasitha

i can't compress bink video when i use bpk or BPK compression going to failed

can anyone please tell me,
what i need to compress bik, bink videos?

arc.ini and dll files for bpk?

yasitha · #7 05-01-2019, 06:25

Quote:

Originally Posted by oltjon

thanks a lot

yasitha · #8 05-01-2019, 07:16

i need code for delete {app} \*..
I have added task kill for precompressor..
but when i cancel and confirm it during the installation,
all install files are left behind..
I want to delete all files when i confirm cancel.
I have try del three but function won't work.

ffmla · #9 05-01-2019, 21:50

Quote:

Originally Posted by yasitha

i need code for delete {app} \*..
I have added task kill for precompressor..
but when i cancel and confirm it during the installation,
all install files are left behind..
I want to delete all files when i confirm cancel.
I have try del three but function won't work.

https://fileforums.com/showthread.php?t=99148
In the above link,the issue you posted had already been discussed.
For code section refer post #2.

yasitha · #10 07-01-2019, 06:05

Quote:

Originally Posted by ffmla

https://fileforums.com/showthread.php?t=99148
In the above link,the issue you posted had already been discussed.
For code section refer post #2.

Thank you

yasitha · #11 09-01-2019, 12:29

Anyone know what precompressor use for
marvel vs capcom infinite?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Masked Compression (Ultimate compression in one go)	panker1992	Conversion Tutorials	661	13-05-2024 16:51
New Fox Kompressor 1.01c Ultimate	felice2011	Conversion Tutorials	31	07-06-2023 14:58
Preprocessing / Optimization / Re compression For Better Compression of Games	Gupta	Software	14	19-10-2022 03:25
Ultimate Conversion Compressor (UCC)	vollachr	Conversion Tutorials	55	26-04-2021 09:27
Best Compression Format	DRAGoN.X	Chit Chat	11	07-09-2017 23:13

The Following 2 Users Say Thank You to Simorq For This Useful Post:
oltjon (03-01-2019), yasitha (03-01-2019)

The Following User Says Thank You to oltjon For This Useful Post:
yasitha (05-01-2019)

The Following User Says Thank You to ffmla For This Useful Post:
yasitha (07-01-2019)