#1
|
|||
|
|||
Cant copy or create to F Drive on XBOX
I am using FlashFXP and have no problem copying off of the xBox and navagating on the xBox but I can not create a directory or copy anything to the F drive. I need to copy and create on the F drive so I can copy my backed up games there.
Yes, I have the chip installed and I have an IP and have EvoX installed. Now what. Thanks, Nick |
Sponsored Links |
#2
|
||||
|
||||
The "F" drive has to be enabled (if you are using the nwer version of evoX, which uses an evox.ini instead of the menu.ini), but It has no space to put games on it. You need to install a new HDD to use it. And I wouldn't put more than 1gig on the xbox original HDD cuz you never know what'll happen if you ran out of space on a partition that is used for other things than saving.
__________________
--v1.0 [COLOR=Gray]case modded[/COLOR] Xbox with a [COLOR=DarkGreen]160gb[/COLOR] HDD upgrade[URL="irc://irc.efnet.net/fileforums"] [/URL] |
#3
|
|||
|
|||
How big are the different partitions?
|
#4
|
||||
|
||||
Each partition has a different amount. The "e" drive has like 4.5gb. The "F" drive is a little smaller than that, and only 1 game or so can fit on it. I wouldn't recommend putting games on the HDD unless you replace it with a larger one.
If you want to know the size of the drives (or how much space you have left), load up evolution X and there should be a choice like "hard-drive" or something like that. It should say how much space you have left on each partition (in bites). In the new version, go to the setup screen and scroll down. It shoulc say it in there.
__________________
--v1.0 [COLOR=Gray]case modded[/COLOR] Xbox with a [COLOR=DarkGreen]160gb[/COLOR] HDD upgrade[URL="irc://irc.efnet.net/fileforums"] [/URL] |
![]() |
Thread Tools | |
Display Modes | |
|
|