XTool 2020 (Main Project)

[Anonymous0000]

Is there any ui-based interface that I can use to input the commands?

[ScOOt3r]

i just used the same files located in xtool 0.4.2
and here are my pics

Screenshot_1.png
It compressed just fine with no errors

Screenshot_2.png
here are the files for xtool 0.4.2 as you can see it created a freearc1.tmp file

Screenshot_3.png
here are the files that i was test packing

my arc.ini is
[External compressor:xtool]
header = 0
packcmd = xtool.exe precomp -mzlib+preflate -c32mb -t85p - - <stdin> <stdout>

[External compressor:lolz]
header = 0
packcmd = lolz\lolz_x64.exe -d256 -dt -dtb1 -mtt1 -mt14 -fba1024 -tt5 -mc128 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp

[External compressor:srep]
header = 0
packcmd = srep\srep.exe -m3f -l512 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp

my pack.bat file is
arc.exe a -ep1 -r -ed -s; -w.\temp -mxtool+srep+lolz data.bin "pack\*"

[seryogakms]

Originally Posted by Masquerade

zlib+kraken?

[Razor12911]

Originally Posted by Anonymous0000

Is there any ui-based interface that I can use to input the commands?

https://fileforums.com/showthread.php?t=104507

Originally Posted by Masquerade

zlib+kraken?

I doubt that's the issue, @ScOOt3r only uses zlib related codecs however he has an issue of his own (might be related)

@seryogakms, @ScOOt3r

I'll take a look at it but it will be challenge because I am not experiencing any of the issues you're reporting.

[Hexagon123]

When using Knight Compressor, it uses too much DLL files that made it crash. But, I deleted some to make it work. Multiple files work but not Unity.

[Masquerade]

seryogakms
Apologies for criticising your zlib+kraken method, I have tested out a new game which contains both. Sorry. Hope you can forgive.

[Razor12911]

[External compressor:xtool]
header    = 0
packcmd   = xtool.exe precomp { -moption} -c32mb -t100p $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = xtool.exe decode -t100p - - <stdin> <stdout>

@seryogakms, @ScOOt3r
can you try this configuration, if xtool throws any errors please post the error message here

[ScOOt3r]

ok after testing it i now get this error

if i do a clean install of xtool 0.4.1 with no library files added i get this

it creates the data.arc with this xtool setting, but it wont decompress with out errors.


[External compressor:xtool]
header = 0
packcmd = xtool.exe precomp { -moption} -c32mb -t100p $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = xtool.exe decode -t100p - - <stdin> <stdout>

[Razor12911]

can you share this input along with your system specs?

[ScOOt3r]

My System Specs are as follows:
AMD Ryzen 9 5950X
16 Cores
32 Logical Processors
64 GB of Ram
NVIDIA GeForce RTX3090 GPU

[daveyrob]

i had the same Disk Full issue, remove libzstd.dll and it will work.

[seryogakms]

Originally Posted by Masquerade

seryogakms
Apologies for criticising your zlib+kraken method, I have tested out a new game which contains both. Sorry. Hope you can forgive.

It's all right!

[BLACKFIRE69]

Originally Posted by ScOOt3r

ok after testing it i now get this error

if i do a clean install of xtool 0.4.1 with no library files added i get this

it creates the data.arc with this xtool setting, but it wont decompress with out errors.


[External compressor:xtool]
header = 0
packcmd = xtool.exe precomp { -moption} -c32mb -t100p $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = xtool.exe decode -t100p - - <stdin> <stdout>

ScOOt3r,
this is ISDone right? how about the unpack.bat? you get the same error?

[ScOOt3r]

well i got it working compressing and decompression as someone posted above to remove libzstd.dll.. i did that and it works just fine now.. weird that it was that file
not sure how important libzstd.dll is...

ScOOt3r

[seryogakms]

Originally Posted by Razor12911

[External compressor:xtool]
header    = 0
packcmd   = xtool.exe precomp { -moption} -c32mb -t100p $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = xtool.exe decode -t100p - - <stdin> <stdout>

@seryogakms, @ScOOt3r
can you try this configuration, if xtool throws any errors please post the error message here

File Patch.bin from "Horizon zero dawn" (last version).
5 434 479 154 bytes → 360 912 358 bytes (xtool_0.3.9 ONLY). Compression time — 36 minutes. Unpacking time — 18 minutes.

Intel core i5-3550, 20 GB RAM.

arc.exe a -ep1 -r -ed -s; -i2 -w.\temp -mxtool+srep+lolz Packs\data.bin "H:\06. 1.0.11.9 (1.11)\Packed_DX12\Patch.bin"

[External compressor:xtool]
header = 0
packcmd = xtool precomp -mkraken -d3 -c64mb -t100p - - <stdin> <stdout>
unpackcmd = xtool.exe decode -t100p - - <stdin> <stdout>

[External compressor:srep]
header = 0
packcmd   = srep64 -mem512m -l512 -m5f $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = srep -d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

[External compressor:lolz]
header = 0
packcmd = lolz_x64.exe -d128 -mc1023 -dtb1 -tt4 -mtt1 -mt8 -mtb128 -fba1024 -oh14 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = lolz_x86.exe $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

No other version of xtool gives such results under any settings.

xtool_0.4.2 with the same (and other) settings:
5 434 479 154 bytes → 2 738 426 574 bytes. Compression time — 3 hours and 56 minutes. Unpacking time — 18 minutes.