pZLib v3 (Final release)

[rinaldo]

Originally Posted by rinaldo

x unpacked

[Dansoft]

Originally Posted by felice2011

If you do a search in forum, you don't need no help

ive tried, could you point me somewhere?

[felice2011]

Originally Posted by Dansoft

PLEASE ANYONE. Can someone please help create for me a compressor having pzlib+srep+lzma or something better? please

Originally Posted by felice2011

If you do a search in forum, you don't need no help

Originally Posted by Dansoft

ive tried, could you point me somewhere?

Rinaldo has posted a compressor for your request...

Here you find another more complete...http://fileforums.com/showthread.php?t=97611

Here you find another more complete of the M&S Kompressor http://fileforums.com/showthread.php?t=98709

But if you want a complete index just go here..http://www.fileforums.com/showthread.php?t=96782....

[Dansoft]

Originally Posted by rinaldo

while compressing, it just closes. have no idea why

[doofoo24]

on windows 8.1 when i try to use 4x4:lzma with pzlib+srep i get this error many time ?
on windows 10 work great...
any idea...
thank for help

[TWOELV]

is pzlib better than the masked data compressor ?

[rinaldo]

Originally Posted by TWOELV

is pzlib better than the masked data compressor ?

no

[Chayan Manna]

Realy the best. It is Very fast but same ratio as reflate, most of times better than reflate.
I Used it in "Crysis 2 Maximum Edition" and got better ratio than reflate without any CRC error.
Where Precomp failed and reflate gave CRC error.
Compressed it From 9.19 GB to 6.66 GB with pzlib+srep+delta+lzma.
with reflate decompression time = 32 mins (but at94.7% CRC Check failed)
with pzlibv3 decompression time = 13 mins
Other Precompressor makers must learn from you.
All your projects are best and most usefull.
Keep up the good work.

[doofoo24]

Pzlib v3 does not work on cod black ops 3 / infinite warfare / modern warfare remastered ???
i tried plz4 it work but not the same ratio that i see on the internet some mange to get more ratio ?

[Gupta]

>>Pzlib v3 does not work on cod black ops 3 / infinite warfare / modern warfare remastered ???

because they got lz4 and pzlib is for deflate

>>i tried plz4 it work but not the same ratio that i see on the internet some mange to get more ratio ?
fuc* of* videos
reduce their quailities

[doofoo24]

Originally Posted by PrinceGupta2000

>>Pzlib v3 does not work on cod black ops 3 / infinite warfare / modern warfare remastered ???

because they got lz4 and pzlib is for deflate

>>i tried plz4 it work but not the same ratio that i see on the internet some mange to get more ratio ?
fuc* of* videos
reduce their quailities

it seems that fitgirl use modified cls-precomp with code of lz4 and use xdelta3....
there is no difference in between this repack and my steam version of cod infinite warfare...

[Gupta]

>> it seems that fitgirl use modified cls-precomp with code of lz4 and use xdelta3....'
May be he made a universal cls for freearc may be working same as Razor's precompMt

[doofoo24]

LZ4io.c - LZ4 File/Stream Interface
https://github.com/mldbai/mldb/blob/...xt/lz4/lz4io.c

[MCWRX]

Hey there. First, thanks Razor for pZlib.

I compressed Mad Max, and when I install it my CPU kinda gets fully loaded for some seconds and setup progress goes on, then CPU load is between 0-1% and setup progress just freezes, and so on. So, I am getting a very bad decompression time. How can I cure this?

[COPyCAT]

Originally Posted by zouzouni

This pzlib v3 (so is V2) doesn't work with cls pzlib Dll ....not meant to work with , Razor 12911 didn't program it to use cls Dll... ; )

Hey Razor , Thx again for that impressive tool , awesome work adding reflate functionnality for special zlib headers (optionnal Dll) ... wow ,very fast and great compression ratio

.... but main thing is that I can't unpack at all , always give crc checksum error at some point!

I tried on Shadow Warrior 2 bin files . Pzlib could reflate 12.9 to 22 Gb and then applying srep +lzma I could get a nice 8.4 Gb but decomp ( using ASC v0.0065 ) will always get stuck no matter how I do ... (same with pzlib v2)

I tried both V3 and hotfix, with and without optionnal files, I tried
parameters like :
-m2 -x -r9 -t4 (out of 8 threads for my xeon 3440) with optionnal Dlls
-m2 -c128m -t4
-m2 -c32m -st50
.....all giving roughly same ratio but still unpacking errors (ASC just stops decomp but no error)

Then i tried changing Input/Output settings in arc.in
from: - -0 - <stdin> <stdout>
to - $$arcdatafile$$.tmp -o $$arcpackedfile$$.tmp (PrinceGupta recommendation)
....still errors at decomp , ASC stops

Then I tried to remove files on which ASC seems to hang... it always hangs on a new file, eventhough those files could be decomp previously (before I start to remove them)

Does this has something to do with ASC ....???

Then I finally tried to change Srep settings playing between m3f/m5f and even adding -hash=md5 crc checksum.... same results, ASC stops.

I am talking about errors because I am pretty sure that if I use inno script it will send me crc checksum error ....this already happenned to me using pzlib v2 with Skyrim SE and MGSV TPP (ASC stops and Inno gives a crc error)

....and I ve just finished DarkSiders Warmastered Edition .... It wasn't decompressing either (-m2 -c400m -t4, seems to be the best setting to catch all zlibs) ....I tried Srep m5f setting and it now decompress ok with ASC ..... awesome!


BIG thk you anyway for this great christmas Gift !!! we have a new toy to play with!!

@zouzouni, Shadow Warrior 2 has UNIQUE special stream on 1 BiG file, wherebout 6 GB single file (pc_arch_common.bin). Those reflate method will not passed the unique special stream and result in error while decompressing. Located wherebout 45% of file streams, try to use batch command reflate & combine with precomp (if precomp fail, then that's the unique stream) to see the address of exact location.

By the way, pZlib v3 was AWESOME!!! Thanks A Lot [RAZOR12911]
Working great on MAD MAX. It gives 12.95% compression ratio and 30 minutes of installation with no checksum error.
OS: Win7 SP1 x64
Pro: AMD FX-8370 (8-core) 4.01 GHz
RAM: 16 GB
HDD: TOSHIBA 500 GB (7200 RPM)
Compresstion time took: 10 hours 27 minutes
Restoration time took: 30 minutes
Condition: game running smooth
MadMax_pZlib3_Working.png
MadMax_pZlib3_CRC.png
Thank Q. [Razor12911] for Your Time craft/forging the pZlib3 Compressor. for all of us @this forum. SALUTE & God Bless You.