altef_4's installer

[Razor12911]

ok, fixed. my bad. by the way. what's the plan?

the password length is incorrect by one char.

[altef_4]

Originally Posted by Razor12911

ok, fixed. my bad. by the way. what's the plan?

the password length is incorrect by one char.

fixed!

[mausschieber]

Originally Posted by altef_4

i almost done first working version of installer (Release Candidat 1 ) and maybe after day or two days i will upload it, now you can check fixed LangBar and translation (currently only 5)

here are the german translation of end from german.isl from IS_Lang_Pack

ButtonPlay=Start
ButtonOptions=&Optionen
ButtonLicense=&Lizenz
ButtonInfo=&Information
ButtonTask=&Aufgaben
ButtonSystem=&System Req.
ButtonSlideShow=&Diashow
ButtonVideo=&Video
IdlePriorityText=Niedrig
BelowNormalPriorityText=Niedriger als normal
NormalPriorityText=Normal
AboveNormalPriorityText=Höher als normal
HightPriorityText=Hoch
RealTimePriorityText=Echtzeit
NextFormSystemCheckError=• Sie haben nicht überprüft, welche Konfiguration Ihr Computer braucht.
NextFormLicenseError=• Sie müssen die Lizenzvereinbarung akzeptieren, bevor Sie fortfahren.
NextFormText1=Installation nicht möglich aus den folgenden Gründen:
NextFormText2=Bitte korrigieren Sie diese Fehler um weiter zu machen.
NextFormText3=Die Installation ist nicht möglich, aus folgendem Grund:
NextFormText4=Bitte korrigieren Sie diese Fehler um weiter zu machen.
SystemTitle=Systemanforderungen
System0=Der Setup-Assistent wird prüfen, ob Ihr System die Anforderungen erfüllt.
System1=Ihr System entspricht den minimalen Hardwareanforderungen NICHT
System2=Ihr System entspricht den minimalen Hardwareanforderungen
System3=Ihr System entspricht den empfohlenen Hardwareanforderungen
System4=Ihr System entspricht den maximalen Hardwareanforderungen
System5=Installierte Hardware
System6=min
System7=rec.
System8=max
NeedSpaceText=Benötigte Größe: [size1] | Freier Speicherplatz: [size2]
SaveGamesTitle=Gespeicherte Spiele
SaveGamesText=Lösche gespeicherte Spiele und Konfigurationen aus dem Ordner:%n[path]
PassedTime=Vergangen: 
RemainTime=verbleiben: 
Hour_Short= h 
Min_Short= min 
Sec_Short1= sek
Sec_Short2= s
Hour_Full1=Stunden 
Hour_Full2=Stunde 
Hour_Full3=Stunden 
Min_Full1=minuten 
Min_Full2=minute 
Min_Full3=minuten 
Sec_Full1=sekunden 
Sec_Full2=sekunde 
Sec_Full3=sekunden

[altef_4]

in last few days i'm working on something like yener90's CI Designer or Razor12911 Conversion Designer, and in attachment is alpha preview (for those who intresting), but then i think that i was upload first version of my installer one year ago, but seems like, no one of the users of this forum no even try create conversion based on it (yes, it was useless a long time, bugs and, maybe, too hard to use , but now about one month, is avaliable working wersion) so, i don't know, i have to continue or not. At this moment latest version of installer was downloaded 157 times and no questions. I will not delete this thread, but maybe stop working on installer (i will add some info in first post e.g copyrights, ideas that was taken from others scripts).

pakrat2k2 can you change thread title on altef_4's installer or something like this, because, latest version of source code is crypted.

[Razor12911]

Nice one altef.

sensational design

[y_thelastknight]

Nice.

[pakrat2k2]

Originally Posted by altef_4

pakrat2k2 can you change thread title on altef_4's installer or something like this, because, latest version of source code is crypted.

title is already - altef_4's installer source code

Do you want it different then that ?

[sentinelks]

better installer simple but well thought out

nece work in delphi

[altef_4]

Originally Posted by pakrat2k2

title is already - altef_4's installer source code

Do you want it different then that ?

i dont want to foollysh users, because they cant get source code enymore. if you look at the thread title you see altef_4's installer source code

[altef_4]

Originally Posted by Razor12911

Nice one altef.

sensational design

yea, design is really "sensational"

[altef_4]

little update

[psyL0w]

Originally Posted by altef_4

i think that i was upload first version of my installer one year ago, but seems like, no one of the users of this forum no even try create conversion based on it (yes, it was useless a long time, bugs and, maybe, too hard to use , but now about one month, is avaliable working wersion) so, i don't know, i have to continue or not.

Since you decided to protect the code, your installer’s been made less attractive. Your work had a great educational goal, now it’s a closed installer like lots of other ones .
IMHO, the tutorial section is not really the right location to host it.

[altef_4]

Originally Posted by psyL0w

Since you decided to protect the code, your installer’s been made less attractive. Your work had a great educational goal, now it’s a closed installer like lots of other ones .
IMHO, the tutorial section is not really the right location to host it.

moderators move this thread in tutorial section, about source i thinked maybe upload full source from first version to version 2.3.1.0 for thos who want learn to write inno setup scripts.

[psyL0w]

Originally Posted by altef_4

moderators move this thread in tutorial section

Your thread would have more visibility on the main DVD conversion section

Originally Posted by altef_4

about source i thinked maybe upload full source from first version to version 2.3.1.0 for thos who want learn to write inno setup scripts.

Good idea! Seeing further by standing on the shoulders of giants

[Grumpy]

Originally Posted by psyL0w

IMHO, the tutorial section is not really the right location to host it.

The first post has been 'massively' edited by altef_4 himself, it now looks nothing like it did when first posted. When first posted it was originally posted as a tutorial for his own installer. At one stage altef_4 was adding more parts of the 'tutorial' to the first post which he mentions in Posts 5, 6 and 7 of this thread. (I have quoted those threads below).

Originally Posted by altef_4

Added 2nd part of tutorial.

Originally Posted by altef_4

Added 3rd part of tutorial

Originally Posted by altef_4

Installer script and tutorial updated [17.12.2012]

So, that is how and why this thread ended up in the 'correct' Tutorial Section.