XTool - Successor of ZTool

[Simorq]

Increasing Chunk Size improves crilayla speed.

Sonic Forces 16 GB > 31.3 GB

[External compressor:xCriLayla]
header    = 0
packcmd   = _PE\xCriLayla\XTool e:precomp:t100p:crilayla - - <stdin> <stdout>
unpackcmd = _PE\xCriLayla\XTool d:precomp:t100p - - <stdin> <stdout

P: 4 Hour D: 2 Hour
__________________________________________________ __________

[External compressor:xCriLayla]
header    = 0
packcmd   = _PE\xCriLayla\XTool e:precomp:t100p,c128m:crilayla - - <stdin> <stdout>
unpackcmd = _PE\xCriLayla\XTool d:precomp:t100p - - <stdin> <stdout

P: 90 Min D: 1 Hour

[KaktoR]

Originally Posted by Simorq

Increasing Chunk Size improves crilayla speed.

Sonic Forces 16 GB > 31.3 GB

[External compressor:xCriLayla]
header    = 0
packcmd   = _PE\xCriLayla\XTool e:precomp:t100p:crilayla - - <stdin> <stdout>
unpackcmd = _PE\xCriLayla\XTool d:precomp:t100p - - <stdin> <stdout

P: 4 Hour D: 2 Hour
__________________________________________________ __________

[External compressor:xCriLayla]
header    = 0
packcmd   = _PE\xCriLayla\XTool e:precomp:t100p,c128m:crilayla - - <stdin> <stdout>
unpackcmd = _PE\xCriLayla\XTool d:precomp:t100p - - <stdin> <stdout

P: 90 Min D: 1 Hour

I have to cap unpack crilayla to t50p (or t2 for me), otherwise extraction gives error (crc fail).

[Simorq]

Originally Posted by KaktoR

I have to cap unpack crilayla to t50p (or t2 for me), otherwise extraction gives error (crc fail).

USe XTool 0.9

[Razor12911]

Originally Posted by Simorq

Increasing Chunk Size improves crilayla speed.

Sonic Forces 16 GB > 31.3 GB

[External compressor:xCriLayla]
header    = 0
packcmd   = _PE\xCriLayla\XTool e:precomp:t100p:crilayla - - <stdin> <stdout>
unpackcmd = _PE\xCriLayla\XTool d:precomp:t100p - - <stdin> <stdout

P: 4 Hour D: 2 Hour
__________________________________________________ __________

[External compressor:xCriLayla]
header    = 0
packcmd   = _PE\xCriLayla\XTool e:precomp:t100p,c128m:crilayla - - <stdin> <stdout>
unpackcmd = _PE\xCriLayla\XTool d:precomp:t100p - - <stdin> <stdout

P: 90 Min D: 1 Hour

Originally Posted by Simorq

USe XTool 0.9

Originally Posted by Simorq

DataPC_ACE_Egypt_ext.forge 12.4 GB

AFR:A2 > 33.3 GB | P: 45 Min D: 30 Min

xOodle > 33.3 GB | P: 39 Min D: 30 Min

ARC.ini

[External compressor:afr]
header    = 0
packcmd   = AFR_x64.exe e {options} $$arcdatafile$$.tmp $$arcpackedfile$$.tmp
unpackcmd = AFR_x64.exe d #in #out <stdin> <stdout>

[External compressor:xOodle]
header    = 0
packcmd   = _PE\XTool e:precomp:t100p,c128m:oodle - - <stdin> <stdout>
unpackcmd = _PE\XTool d:precomp:t100p - - <stdin> <stdout>

:LOG

:AFR
Creating archive: afr.Bin using afr:a2
Compressed 1 file, 13,407,420,416 => 35,820,682,539 bytes. Ratio 267.17%   
Compression time: cpu 26.64 sec/real 2646.71 sec = 1%. Speed 5.07 mB/s
All OK

Testing archive: afr.Bin
Tested 1 file, 35,820,682,539 => 13,407,420,416 bytes. Ratio 267.17%       
Testing time: cpu 28.45 sec/real 1790.77 sec = 2%. Speed 7.49 mB/s
All OK

:XTool 0.9
Creating archive: XTool.Bin using xOodle
Compressed 1 file, 13,407,420,416 => 35,817,965,269 bytes. Ratio 267.15%   
Compression time: cpu 22.91 sec/real 2286.35 sec = 1%. Speed 5.86 mB/s
All OK

Testing archive: XTool.Bin
Tested 1 file, 35,817,965,269 => 13,407,420,416 bytes. Ratio 267.15%       
Testing time: cpu 11.19 sec/real 1759.10 sec = 1%. Speed 7.62 mB/s
All OK

AMD Ryzen 5 1600 3.2GHz

I'm away but I like how you're helping towards the project, but most importantly, helping people use the tool.
Keep up the good work