Copy every StarForce 3 Game, no cracks are required

[manofsamba]

Hello, lads,

I had installed SH3 from the mds / mdf image of the game, mds is the karlmueller's version. This image resides on a haddisk on an external drive, which is connected via USB. The game installed perfectly, upgraded, disabled my lone cd (whic is primary slave), mounted the image at external drive,

and voila!

the game will certainly work, but since i have used the mds of karlmueller, my serial number is rejected! I can test it (and will %99percent succeed), if he could PM me the EMEA version!

Try USB connections, friends, you will prevail!

And Karl, I hope you will read this post and help me

By guys!!

[Leecher]

Is the only trick, to mount the image in from a ramdrive in a virtual drive or do i have to mount the image IN a ram-drive?

Greetz Leecher

[Alias101]

Mount the image from a ram drive to a DM tools virtual drive (all emulation on)...you cant mount to a ram drive, hopes this clears it up.
On another note, dont know if somebody knows anyway around this, I took a cracked version of the protection.dll from my NO-CD patched CMR2005 and renamed it udmlib.dll and copied it over the original one in SCCT to try it out. NOw when I start SCCT I get the CM2005 picture trying to check the disk. As far as I can tell I think it bypassed the protection but was unable to start the game...think its cause it try's to point a file or exe in the CMR2005 directory instead. Does anyone know how to edit this to work with SCCT?? Crazy Idea I know, but It may work . My kids dont understand how to mount an image so a Cd crack would be better for me, I would buy SCCT on D2D just to get a cd free version but you cant activate in Scotland, only america according to there site

[Pyr0]

what ramdrive software are you using?
and could you give the details of your configuration/settings of daemontools and your ramdrive please?
the more detail the better

[Optimummind]

I tried his method using DT v3.47 with all emulation options set on, all Alcohol 120% virtual drives turned off, and using RAMDisk v1.7. Also, both the CD-drives and Nodes were disabled using StarForce Nightmare v1.12.

Well, it didn't work. I didn't really expect it to so I wasn't disappointed, which is a good thing.

[Steavis]

I tried the method karlmueller described above and i used his .MDS file to burn my selfmade image (german version).I upgraded to version 1.2 and everything works fine.
Thank you for your description.

[nemo63]

hi.

i tried the karlmueller method with sh3.mds but i have a key pb.
i use the M****-*****-Z****-****J-8***X but it s bad
Is this the good key for european version ?
Can somebody send me the good k by pm.

Note that i use this method wth scct and it s work fine

thanks