View Single Post
  #1  
Old 11-10-2002, 17:15
BG's Avatar
BG BG is offline
Registered User
 
Join Date: Dec 2001
Location: ?? No Idea ??
Posts: 2,673
Thanks: 0
Thanked 0 Times in 0 Posts
BG is on a distinguished road
BOOT PROCEDURES FOR ALL MOD CHIPS!(Updated 1/22/2003)

Please do not post a reply...This is the start of a long process in which I will eventually get all boot procedures listed for the different mod chips..

I am writing this to help everyone out... There have been a lot of questions about how to boot backups on consoles that have a mod chip installed. I'm going to list the boot procedures for each mod chip...
NOTE: This will be a continuing effort. If your specific mod chip is not on the list, check back often. I will continue to add chips as time permits. I hope this info will be useful to all...



NEOKEY SBOX:


Booting a PlayStation 1 CDR Backup Copy

• Ensure the USB MOD is switched on (all the way right).
• Insert the PlayStation CDR copy into you PS2 and boot as normal. The USB
• MOD will automatically detect the media and game type.


Booting a PlayStation 1 Original

• Ensure the USB MOD is switched off (all the way left).
• Insert the original PlayStation game into the disc tray and boot the PS2 as normal.


Booting a PlayStation 2 Original

• Ensure the USB MOD is switched off (all the way left).
• Insert the original PlayStation 2 game into the disc tray and boot the PS2 as normal.


Booting a PlayStation2 CDR Backup Copy

• Insert the Action Replay 2 Memory card into a free memory card slot.
• Ensure the USB MOD is switched 'OFF' (all the way left).
• Power on the PS2 and eject the disc tray and insert Action Replay 2 Disc 1 and power the system off.
• Power the PS2 on and wait until the black screen containing the PlayStation2 logo appears then move the USB MOD switch into the 'ON' position (all the way right) allow the system to boot to the Action Replay 2 main menu.
• Select 'Start Game' from the Action Replay 2 menu.
• Select start game 'Without' cheat codes.
• Eject the disc tray, remove the Action Replay 2 disc1 and insert the PlayStation2 CDR copy. Press X to continue.


Please Note: This boot method will not boot some EA Sports titles without patching them first.


R-Mod "No Solder" Mod Chip


Booting a Playstation2 DVD (Silver or DVD-R) Gameshark 2 V1.99b and BELOW

• Boot GS2 disc 1.
• At the main screen, press the EJECT button to eject the CD tray.
• Replace the GS2 disc with an original PS2 DVD game, such as Devil May Cry.
• Close the CD tray (press EJECT again) and wait for about 30 seconds.
• Select START GAME and then select WITHOUT CODES.
• Once the GS2 is asking to change the game disc, press the EJECT button till the light changes from green to orange.
• The CD tray will now open and you can replace the DVD game with your backup copy.
• The CD tray will automatically close after about 5 seconds.
• Wait till the the power LED changes from orange to green again and press X now to start the game.


Booting a Playstation2 DVD (Silver or DVD-R) Gameshark 2 V2.01 and ABOVE

Thanks to Nighstalker for this method!


• Boot GS2 disc 1.
• At the main screen, press the EJECT button to eject the CD tray.
• Replace the GS2 disc with an original PS2 DVD game.
• Close the CD tray (press EJECT again) and wait for 15 seconds.
• Select gameshark codes and turn on or off any code on any game.
• Press start, select with codes and press x to load game.
• A black screen will appear saying "updating codes please wait"
• Do the R-mod swap by pressing and holding eject, swap with backup, tray will close and game will load.

• NOTE: The swap must be performed within the time you see the black screen.

•
Nighstalker has tested this method with GS2 v 2.01 through 2.11.

• It works 100% of the time providing the backup is good.


Booting a Playstation2 CD (Silver or CD-R)

• Boot GS2 disc 1.
• At the main screen, select START GAME and then select WITHOUT CODES.
• Once the GS2 is asking to change the game disc, press the EJECT button till the light changes from green to orange.
• The CD tray will now open and you can replace the CD game with your backup copy.
• The CD tray will automatically close after about 5 seconds.
• Wait till the the power LED changes from orange to green again and press X now to start the game.


Booting a Playstation 1 CD (Silver or CD-R)

• Boot GS2 disc 2.
• At the main screen, select START GAME and then select WITHOUT CODES.
• Once the GS2 is asking to change the code archive, press the EJECT button till the light changes from green to orange.
• The CD tray will now open and you can replace the CD with your backup copy.
• The CD tray will automatically close after about 5 seconds.
• Wait till the the power LED changes from orange to green again and press X now to start the game.


Magic 2


NOTE: This is with the disk assumed in the tray and the tray closed:

Playstation 2 games


•Power up normally from STANDBY with RESET button. A single tap of the reset button is required.


Playstation 1 games & DVD Movies


•Power up from STANDBY with RESET button held until the blue EJECT light comes on.
•Then release RESET and the disk will boot.


NOTE: Turn off the PS2 (to standby) before changing Modes (PS1/PS2/DVD)
__________________
[COLOR=blue][B]**V5 PAL** SCPH-30004 R W/[/COLOR][COLOR=red]Messiah[/B][/COLOR][b][color=blue][/b][/color]
[color=blue][b]**V7 NTSC** SCPH-39001 W/ [/color][color=red] Messiah 2 [/color][color=blue](Installed by My M8: [/color][color=red]Dust2Dust[/color][color=blue])[/color][/b] :)
[COLOR=blue][B]Pioneer DVR-A05 [/color][color=red] (FW 1.30) w/2X Ritek hack![/color][/b] :D
[b][color=blue]Lite-On LTD-166S DVD-Rom W/[/color][color=red]Smart-X[/color][/b]
[COLOR=blue][B]LG GCE-8320B W/[/color][color=red]8MB Buffer[/COLOR][/B]

Last edited by BG; 21-01-2003 at 22:03.
Sponsored Links