Hi at all,
I've a little question for all of you.
I've got an ISO of 007 Racing[PAL] SLES_03355.
This Iso works fine with ePSXe if you load it through File->Run ISO.
Instead, if you try to mount this image on a Virtual CD like Daemon Tools, and go to File->Run CDROM this game not work properly.
So, I have make some test. If you mount this image with Alcohol 120%, and then go to File->Run CDROM the game starts properly. So...
I see the Light!!!
I've mount this image with Alcohol 120%, then I've made the CloneCD image from this virtual unit.
Then I've mount the new image into Daemon Tools and I've start with ePSXe, using menu File-->Run CDROM. The game works fine.
The problem is with Breaker Pro. I usually use PCSX because it can show a Console Output (very useful).
When I start the 007 Game, even with the virtual unit of alcohol 120% or Daemon Tools, the game starts properly (with the function File->Run CD through BIOS). After reading the SYSTEM.CNF file, it starts the KERNEL SETUP!
With the Breaker Pro, the Kernel Setup starts with this CD. When I swap the CD, it freezes before KERNEL SETUP!
Above, I paste the console output to show you what I mean:
Code:
*PCSX*: CdromLabel: BREAKER PRO
*PCSX*: CdromId: BREAKER PRO
PS-X Realtime Kernel Ver.2.5
Copyright 1993,1994 (C) Sony Computer Entertainment Inc.
KERNEL SETUP!
Configuration : EvCB 0x10 TCB 0x04
System ROM Version 4.1 12/16/97 E
Copyright 1993-1997 (C) Sony Computer Entertainment Inc.
ResetCallback: _96_remove ..
*** Here shows the SONY Logo ***
System Controller ROM Version 98/06/10 c3
SetGraphDebug:level:1,type:0 reverse:0
*** Here shows the License PSX Logo ***
BOOTSTRAP LOADER Type C Ver 2.1 03-JUL-1994
Copyright 1993,1994 (C) Sony Computer Entertainment Inc.
setup file: cdrom:SYSTEM.CNF;1
TCB 00000004
EVENT 00000010
STACK 801FFF00
BOOT = cdrom:\BREAKER.PRO;1
argument=
KERNEL SETUP!
Configuration : EvCB 0x10 TCB 0x04
boot file : cdrom:\BREAKER.PRO;1
EXEC:PC0(a0010000) T_ADDR(a0010000) T_SIZE(0000d000)
boot address: a0010000 801fff00
Execute!
S_ADDR(801fff00) S_SIZE()
TYPE : 6 free button or flying-V form
PSX Control PAD Driver Ver 3.0
*** Here shows Breaker Pro Menu ***
TCB 00000004
EVENT 00000010
STACK 801fff00
BOOT = cdrom:\SLES_033.55;1
argument =
*** Here Breaker Pro freezes ***
So, Breaker Pro freezes after reading the SYSTEM.CNF file. With any other emultator, as PCSX, the game starts properly. After this last "argument = " string, the PCSX execute a new KERNEL SETUP!... With Breaker Pro, it seems this not going on...
This is the situation.
Any idea???