FileForums - Prince of Persia 08 (DVD9 to 2x DVD5)

FileForums (https://fileforums.com/index.php)

- PC Games - CD/DVD Conversions (https://fileforums.com/forumdisplay.php?f=39)

- - Prince of Persia 08 (DVD9 to 2x DVD5) (https://fileforums.com/showthread.php?t=85303)

Prince of Persia 08 (DVD9 to 2x DVD5)

release date [based on Prince of Persia]
UK RELEASE: 12-Dec-2008 (Upcoming)
NORDIC RELEASE: 11-Dec-2008 (Upcoming)
US RELEASE: 02-Dec-2008 (Released)

of course send us listing contents rcd and msi if exists

full backup conversion

Quote:

dvd1
all files/folders except :
data4.cab
data5.cab

dvd2
files:
data4.cab
data5.cab
and all folders

volumelabel any

edit
Prince of Persia 08 eng only dvd5

Quote:

Originally Posted by mondragon (Post 365306)

dvd1
all files/folders except :
data4.cab
data5.cab

dvd2
files:
data4.cab
data5.cab
and all folders

volumelabel any

show setup.ini
its multilang?

cheers mondragon perfect %100 works

Works Fine. INstall Sequence ( dvd1-dvd2-dvd1 )

The Game has 5 languages - But dont fit on a single dvd :rolleyes:

Thx.

Conversion to 2x dvd5 works perfect.thanks mate:rolleyes:

Quote:

Originally Posted by dracusorr (Post 365494)

Please insert disc "3"

I am the only one who got this message....

When the install askes for Data4.cab it says: "Please insert disc "3"... ",
Did this happend to anyone?

how cand I edit and put "2" and not "3"

Quote:

Originally Posted by nando2002 (Post 365495)

till today, no one has found a way to overwrite the disk prompt.
you'll have to live with that :)

Only way is to repack cabs, so data3.cab will be on Disk 2 and then it will ask to insert Disc 2

Code:

Disk Prompt when requesting different cab files



data2.cab "Please insert disc 1"

data3.cab "Please insert disc 2"

data4.cab "Please insert disc 3"

data5.cab "Please insert disc 4"

and so on...

Mondragon conversion works, only thing i did differently was that i copied all files from disc 1 to disc 2, not only folders. It ask Disc 1 at end but just press ok, all files are installed, no need to insert Disc 1 again

Tested on XP, autorun on, no changes to disk 2 autorun.inf and Vista 64bit

ONLY FOR PRO USERS :)
Prince of Persia 08 ENglish only DVD5

I. Mess With Cab's
1) Copy game to temp folder
2) Download 'POP08-iscab14.0.0.162' and extract to temp folder
3) Run:
layout.bat
02_extract.bat - wait until finish [temp folder takes almost 14GB]
03_remove.bat - wait until finish [data2.cab - 747MB]
04_add_fake.bat - wait until finish
CLEAN_.bat

II. Cleaning to eng only
edit setup.ini and change from>to

Code:

EnableLangDlg=Y

[Languages]

Default=0x0009

count=6

key0=0x0013

key1=0x0009

key2=0x040c

key3=0x0007

key4=0x0010

key5=0x000a

Code:

EnableLangDlg=N

[Languages]

Default=0x0009

count=1

key0=0x0009

2)Delete non english folders in subfolders:
Support\License\
Support\Manual\
Support\ReadMe\

3)Rename in subfolder 'Support\VCRedist\'
vcredist_x86.exe to vcredistx86.exe

III. Important parts and the longest - Compressing
1) Download FreeArc and install it to any place

2) Run FreeArc and go to temp folder and subfolder 'Support\VCRedist\' [where extracted 11 forge files exists]
check screenshot for option for every forge file - pack it separately with max compression + gui
[select one file and click red button 'Add', 'Maximum (192mb decompression): -mx -ld=192m', check 'Windows GUI: freearc.sfx']
Attachment 785
Do these steps for every forge files
after all files are compressed - delete all orginal forge files [leave new exe in untouched]

3) Download loader by nando2002, extract it to Support\VCRedist\

4) Make image with any volumelabel and test it before burn

NOTE
in freearc option
'Maximum (192mb decompression): -mx -ld=192m'
mean 2x192MB to decompression - 402 mb for me not 200MB or 192MB

perfect
thanks for share mondragon

ONLY FOR PRO USERS
Prince of Persia 08 Italian only DVD5

I. Mess With Cab's
1) Copy game to temp folder
2) Download 'POP08-iscab14.0.0.162' and extract to temp folder
3) Run:
layout.bat
02_extract.bat - wait until finish [temp folder takes almost 14GB]
03_remove.bat - wait until finish [data2.cab - 747MB]
04_add_fake.bat - wait until finish
CLEAN_.bat

II. Cleaning to italian only
edit setup.ini and change from>to

Quote:

EnableLangDlg=Y
[Languages]
Default=0x0009
count=6
key0=0x0013
key1=0x0009
key2=0x040c
key3=0x0007
key4=0x0010
key5=0x000a

Quote:

EnableLangDlg=N
[Languages]
Default=0x0010
count=1
key0=0x0010

2)Rename in subfolder 'Support\VCRedist\'
vcredist_x86.exe to vcredistx86.exe

III. Important parts and the longest - Compressing
1) Download FreeArc and install it to any place

2) Run FreeArc and go to temp folder and subfolder 'Support\VCRedist\' [where extracted 11 forge files exists]
check screenshot for option for every forge file - pack it separately with max compression + gui
[select one file and click red button 'Add', 'Maximum (192mb decompression): -mx -ld=192m', check 'Windows GUI: freearc.sfx']
Attachment 786
Do these steps for every forge files
after all files are compressed - delete all orginal forge files [leave new exe in untouched]

3) Download loader by nando2002, extract it to Support\VCRedist\

4) Make image with any volumelabel and test it before burn

NOTE
in freearc option
'Maximum (192mb decompression): -mx -ld=192m'
mean 2x192MB to decompression - 402 mb for me not 200MB or 192MB
FreeArc

Quote:

Originally Posted by kolton (Post 366302)

Dvd5 conversion worked fine for me, but I have a question. If I choose to install PoP to D: for example, will forge files end up in C: or correctly in D: ?

kolton ask this because when you choose to install game on other drive (mine is D:\Games) setup tell you that only 300 mb will take on this drive but when you continue with installation game installs fine and take approx 7.5 gb and installs where you tell the setup to install.

btw great conversion thanks mondragon

Thanks Mondragon.
DVD9 to DVD5 conversion works perfectly!!!

Quote:

Originally Posted by mondragon (Post 365890)

Code:

EnableLangDlg=Y

[Languages]

Default=0x0009

count=6

key0=0x0013

key1=0x0009

key2=0x040c

key3=0x0007

key4=0x0010

key5=0x000a

Code:

EnableLangDlg=N

[Languages]

Default=0x0009

count=1

key0=0x0009

2)Delete non english folders in subfolders:
Support\License\
Support\Manual\
Support\ReadMe\

3)Rename in subfolder 'Support\VCRedist\'
vcredist_x86.exe to vcredistx86.exe

III. Important parts and the longest - Compressing
1) Download FreeArc and install it to any place

2) Run FreeArc and go to temp folder and subfolder 'Support\VCRedist\' [where extracted 11 forge files exists]
check screenshot for option for every forge file - pack it separately with max compression + gui
[select one file and click red button 'Add', 'Maximum (192mb decompression): -mx -ld=192m', check 'Windows GUI: freearc.sfx']
Do these steps for every forge files
after all files are compressed - delete all orginal forge files [leave new exe in untouched]

3) Download loader by nando2002, extract it to Support\VCRedist\

4) Make image with any volumelabel and test it before burn

NOTE
in freearc option
'Maximum (192mb decompression): -mx -ld=192m'
mean 2x192MB to decompression - 402 mb for me not 200MB or 192MB

polish dvd5
use attached files :
loader and iscab
and skip setup.ini editing

u know in freearc u can just select all the files and do 'compress each file to seperate file'
not do them one by one.

Mondragon conversion works perfectly in 1dvd5. Wow languages sure takes a lot of space... Thanks mondragon for this knowledge!