New GDRom Protection Crack Tools
 

GDRom Protection Crack Tools by Pekearai

--------------
File explanation -

hack3.exe :
It change a numerical of value in "1st_read.bin"
it rewrites 45150 and 45166 LBA, "5EB0 to 9600"
It use to crack the GDROM protection . eg. hang or reset after S**A Licensed Screen

hack3 1st_read.bin 0.


cdda.exe : Patch 1st_read.bin to enables it to use CDDA.
Notes: It only works on Gametype katana with cdda like "vitural-on, Mr.Dirller, GT2..."

cdda 1st_read.bin


dahack.exe: 1st_read.bin in which CDDA is contained uses here.

1st_read.bin is rewritten using dahack.exe.
The usage is the same as that of hack.exe.

For example, if session 2 start at LBA 35500.

dahack 1st_read.bin 35500 .

Next,

cdda 1st_read.bin

Then run binhack .

Cautions: This patch is not test on all DA games,

This patch information is using the method which post by Mr.KiMWU
Please use as self-responsibility. .

does this work??? does this make it possible to copy a dc game straight from the gdrom??? please email with detailed instructions...thank you..... [email protected]

Hey, email me too dude, i'd appreciate it.

im curious too... please email me

Hack3 .exe is for use to crack the Bootbin protection after u rip it from GDROM.
eg. hang or reset after S**A Licensed Screen

cdda.exe :
Patch 1st_read.bin to enables it to use CDDA.
It means u can active the cdda from accession non-cdda release, ie.u can patch Non-CDDA S**A GT to S**A GT with CDDA.

dahack.exe is for patch the cdda lba in Bootbin




GDK -> Click to download <-

lol... why don't you cheapasses just buy a ripping cable instead of looking for sofware to do it? its really not that hard and its impossible to do with a normal cd drive..

to DreamcastKeV

without binhack & iphack like Tools ...Do u think u can burn protection GD game bin to non-boot or selfbootable ~~LoL

----------------------

Ok, so what is BinHack? Where ya get it? Is it just wjat sets 1st_read.bin to say like 11700? If so, must i run hack3.exe first?

>lol... why don't you cheapasses just buy a ripping cable instead of looking for >sofware to do it? its really not that hard and its impossible to do with a normal >cd drive..

binhack in echelon sbkit

U need run hack3.exe before u create iso :)

1) hack3 1st_read.bin 0
"crack the protection first"

2) hack 1st_read.bin 11700
hack 2_dp.bin 11700
hack maigo.bin 11700
hack sg_dpldr.bin 11700
hack *.bin 11700 .....
"Patch selfboot Lba"

3) Binhack 1st_read.bin & ip.bin
"Patch the ip.bin to bootable"

-----

ok, this is what i did. i got all the data, downsample the *.dcz files so it would all fit on my cd. i then ran:
hack3 1st_read.bin 0

then:
hack xxxx.bin 11700 for the other *.bin files
then binhack for ip.bin and 1st_read

made an iso, insert ip.bin, burned it

it goes to the sxxa screen, then, still, is like my dc shuts of, loose the picture completely. What am i doing wrong?

which gxxe u re trying???

rayman 2

xeno, tried again, and same thing. i don't understand. i run hack3, hack, and binhack. it goes to the sxxa screen, then, tries to load, then blacks out (like my dc isn't even on). i hacked 1st_read.bin with hack3 and hack and binhack, and all the others (exept for ip.bin) with hack.exe. my lba is 11700, so i use that.
hack3 1st_read.bin 0
hack 1st_read.bin 11700
hack restofbins 11700
then run binhack, make iso, insert ip, burn. fails everytime

ok xena, few questions....

could it be my other bin files, like 2_do.bin? should i run hack3.exe on them, too?
and, when i run hack3.exe on a file, then hack.exe, the hack.exe has no effect on the file..but if i run hack.exe, then hack3.exe, hack3.exe only chnages 2 parts of the bin file, instead of 3. may not be explaining this good.

should i run:
hack3 binfile 0
hack binfile start-lba(11700)

or

hack binfile start-lba(11700)
hack3 binfile 0

or hack3 binfile start-lba(11700)

?

hack3.exe only work on orginal unpatch bootbin
"6EB0 0000 0100 0000 4344 303031",
if u patched the bootbin to 11700 or 11702 first ,the hack3.exe will not patch the bootbin


did u get the screen information when u patch the bootbin like below??

---dos screen---
c:\selfboot\dreamrip\hack\hack3 1st_read.bin 0
000a45a4->
000a4974->
0012f998->


---------------
Also what's the rayman 2 game type ,Katana,katana with cdda,wince or wince with cdda?

How many .bin file hv string CD001?
hv warning da or not?
Please give more information,otherwise can't help.