Tomb Raider-Angel of darkness
 

Has anyone been able to make a working back-up of this game? I have backed up over 20 dvd games with recordnow max. But the Tomb Raider game just goes to black screen and doesn't load. Tried Nero and dvd decrypter also with the same result. The dvd is in perfect shape with no scratches or prints.

What Chip do you have, that always helps us figure out the problem...

Starchip
 

It is called the starchip. It is a copy of the neo 2.2.

I have a working back-up (but I didn't make it) and it does stay at the black screen for a long time.

What do you mean?
 

You mean if I wait long enough it will boot? I only waited for a few seconds and just figured it was stuck. Please clairify

I was just about to tap 'reset' when it booted so yes be patient.

Starchip trouble
 

Just to let everyone know the Starchip which is Neo 2.2 chip clone. Will not boot Tomb Raider-Angel of darkness. Made a back-up and it worked on my buddy's Messiah but not my Starchip. Anyone else have any trouble or find a solution?

lol, there is a neo clone?

i have a perfect backup of tomb raider AOD i always use nero and just copy dvd. but iam having problems backing up the hulk, the game play isnt affected but i cant watch the movie trailer and all the FMV's freeze and then the game picks up again when its a start of a new level

sublime

Games that have probs backing up with Nero can be fixed by using RNM instead.

i would use RNM but for some reason RNM doesnt want to accept the fact that i have a dvd burner. it only reads my cd burner but nero and my other dvd burning programs recognize it.

What burner? Did you try the px engine update here

i have a verbatim dvd+rw nd-1000a <-- thats how nero identifies it.

Backed up Tomb Raider: AOD with Record Now Max on Ritek media and it boots flawlessly on my Apple Console. Just thought I'd say that.... (Oh ya, Hulk too, Same setup) :)

AOD backup
 

I have a version 7 console with the no solder plugmod installed. I have had no trouble backing up ps2 dvd games and playing them until AOD. I have made coasters with dvd decrypter and cdrwin refuses to read the track. Any sugestions?

It looks like gameshark/action replay users need to create a new code consisting of all 0's (zeros), then choose to play game with codes.

Same problem. I've got the no solder/gameshark mod, and when it boots up it goes right to the black screen. I've watched the black screen for quite some time now (while I'm writing this) and it doesn't look like its booting up anytime soon. At first I thought my laser was getting bad, but others booted up. Then I thought the DVD blank I used was cheap so I used an expensive one, nothing still. I've used both Nero and Primo DVD and made two perfect copies, that don't work. Is there a patch or has anyone found a trick to boot this thing up with the no solder/gameshark?

See my post two above this one :)

I tried the gameshark swap trick "with codes" and still no game. Perhaps you can tell me your exact boot sequence you used. This is what I am doing so far.

*Boot up the gameshark

*when the gameshark is loaded, press eject and replace the gameshark with PS2 DVD (devil may cry demo dvd)

*wait 30 seconds then goto gameshark codes, load an empty gameshark code, start game, WITH codes.

*when it asks to enter the game and press X - press X and then as the game tries to load, replace it with TR:AOD by holding down the eject button 5 seconds.

With this process, I still get the blank, black screen. Any help is appreciated.

----- a few hours later ---------

Perhaps it was a fluke, but the blank gameshark code didn't work. It wasn't until after I tried to use any other gameshark code with actual codes besides 0s in them did this finally work. Just something to watch for you people having troubles. Thanks for the tips!

WooT !!!!
 

My TRaod booted after trying it 'with codes'. Thanks for the help!

My Tomb raider AOD, back up (NTSC) runs and plays fine until i try to enter "The Herbalist Shop" in the Parisian Ghetto, when the game will lock and the following message come up.

FATAL ERROR : ERROR RMX VERVION MISMATCH.

The message is in a coloured bar, that "rolls" from top to bottom of screen.

Does this mean anything to any one?

I have a messiah 2 chip installed

No solder chip and GS
 

I bought the gameshark 2 ver 3 disc. My no solder chip came with the magic swap discs which has worked fine for all my backups of ps2 dvds until AOD. I created an entry for AOD and a cheat with all 0's with the new gameshark 2. When I try to start the game it tells me cannot load disc. In fact it won't load any of my backups! What am I doing wrong? Please help.

Still Problems with Tomb Raider
 

Hello!

I've read all your mails about booting Tomb Raider.
But I'm still not able to boot a copy of it on my PS2. I've got the NEO2.2 and AR. I never had any problems booting games before.
Can somebody please help me?
And what about this "knife trick"? Never heard of it before...

Thanx a lot!!!

I've tried backing up this game (PAL) version using RNM, Primo, Nero and Alcohol 120% using Ritek media, which i use for all my backups and each copy of AOD either hangs after the Playstation 2 on boot up or reverts back to the browser screen.

i could not get this game to work for me i made 5 copies of both ntsc and pal.

the only way i could get it to work was to use cd loader

I might as well post my experience with this back up too. I have a V7 PS2 with a messiah2 and I use RNM and ritek media. Game backed up just fine and plays just like normal on my NTSC machine.

mmm.. it's weird on why it only works for some.

use prassi dvd
never failed me i have aod and hulk with a v7 / apple 1st gen chip
all my backups have worked flawlessly except SHINOBI never figured out why...

this one has me stumped to :(
im using a pioneer 105 -r drive with a magic chip on a v7 ps2
tried record now max and dvd decrypter...

my copy of tombraider just loads to the playstation2 logo then the screen coes blank, 15 mins and a cup of t later, still black
the copy form dvd decrypter didnt even get that far :(

Hi all,
Forget Nero and all those other ****ty programs. I've got working backups of all the games talked about above. I use a program called B's Recorder GOLD5 from BHA. Available from

http://www.bhacorp.com/

I just select the copy option and record on the fly. Its that simple :-)

Hope this helps.

Paul

Never heard of the program but "on the fly" isn't recommended. Just a little scratch in your original or a slowdown in your cpu and you got yourself a coaster. If I were you....make an image first.

Yes, you have a very valid point !
Although with the system spec I have, I dont suffer from any "slow down" but I agree when advising others I should not have mentioned "on the fly".

Point taken.


Paul ;)

this game has made a lot of people a lot of coasters





btw mine works fine, just like normal with the pioneer 205 amd a ridata 4x ritek, along with RNM

My backup works fine, Pioneer 104 w/ firmware 1.41, Messiah 1 and Traxdata media and the system spec I have below. Flawless.

HOW TO BACK UP TOMB RAIDER ANGEL OF DARKNESS AND OTHER PSX2 DVD
 

FOR THE SLIDE CARD /SWAP MAGIC USER (FOR PLAY STATION 2 VERSION 7)


WHAT DO YOU NEED :
- ALCOHOL 120% SOFTWARE (http://www.alcohol-software.com/download.php)
- A GOOD QUALITY DVD-R (LIKE SONY) !!
- SLIDE CARD AND SWAP MAGIC VERS.2 CD AND DVD DISK.
- CD LOADER 7 VERSION BETA(**)(http://www.ps2ownz.com/index.php?s=)
- ORIGINAL PSX 2 DVD GAME.
-------------------------------------------------------------------------------------
HOW TO BACK UP TOMB RAIDER ANGEL OF DARKNESS AND OTHER PSX2 DVD !!

1. START ALCOHOL 120 %
2. SELECT "COPY WIZARD"
3. SELECT YOUR READER (DVD DEVICE)

4. SELECT THE READ SPEED (MAX 2 x)
5. FOR "SEPARATE IMAGE FILE EVERY" : CHOSE NEVER SEPARATE
6. DESELECT (IF IS SELECTED) COPY CURRENT DISK ON THE FLY,THEN PRESS NEXT (DON'T COPY ON

THE FLY !!)
7. SELECT IMAGE LOCATION AND A NAME FOR IT AND PRESS NEXT
8. SELECT YOUR WRITER (DVD RECORDER)
9. SELECT THE WRITE SPEED (MAX 2x)
10. DESELECT IF IS SELECTED "DELETE IMAGE FILE AFTER RECORDING"!
11. PRESS START TO BEGIN

WHAIT UNTIL IS FINISH TO COPY THE PSX2 DVD ON YOUR HARD DRIVE ,
AND THEN BURN THE IMAGE FILE (NAME.MDS) TO A GOOD QUALITY DVD-R (LIKE SONY).
------------------------------------------------------------------------------
Tomb Raider: Angel of Darkness works great using the SWAP MAGIC TRICK + CDLoader technique.


HOW TO DO the trick with swap magic/slide card :

Load your Swap Magic CD (CD NOT DVD version!!), after it loaded, use the slide card trick

and change your Swap Magic CD with the CDLoader CD you just burned, do the trick again to

close the bay. Wait a sec. Than press X on your gamepad. Wait a moment. You will get the

main CDLoader screen if you burned it correctly. You can press "Circle" on your gamepad to

change the language to english. And/or "Square" if you need to change to NTSC.
Then press the "eject" button, replace the CD Loader CD with the Swap Magic DVD and press

eject again to close the lid. (You do not have to do the slide card trick for this one !!)
Then wait a bit till the screen changes in the left bottom from media/ps2 cd to ps2 dvd,

then press X on the gamepad.
You'll get a red nebula screen for a while, and then the text
"put in a dvdr by ea method". When you get this, use the slide card trick to remove the SM

DVD disk and put your backup from your game inside, do the slide card trick again to close

the bay.
Then press X on your gamepad to start the game.
It takes a few second to load it.
-----------------------------------------------------------------
It worked okay with ps2 version 7 pal EUR.
Without patching !
I used good quality Sony DVD-R 4x speed disks
for the backups of my games.
And good quality Verbatim Datalife CDR's for the making of the CDLoader disk.
-------------------------------------------------------------

(**)--->>Guide to Burn the Cdloder 7 beta.iso file to a CDR whit Alcohol 120%


1.From File menu chose:Open and then chose the file Cdloder 7 beta.iso
2.Select the file and then right clic on it and chose Image Burning wizard
3.Clic next and chose your Cd/DVD recorder
4.Select write speed (max 4x)
5.Select Write Method DAO/SAO
6.Select the tab Write and then press start.
:) :rolleyes: :D

BigHap is right, that record now update really works. i had an earlier version of RNM & it wouldnt recognize my dvd writer. as soon as i downloaded it, i was in business.