FileForums - Assassins Creed Origins v1.5.1 Innosetup Problem

Page 1 of 2

Show 40 post(s) from this thread on one page

FileForums (https://fileforums.com/index.php)

- Conversion Tutorials (https://fileforums.com/forumdisplay.php?f=55)

- - Assassins Creed Origins v1.5.1 Innosetup Problem (https://fileforums.com/showthread.php?t=102227)

ZAZA4EVER

13-09-2018 15:03

Assassins Creed Origins v1.5.1 Innosetup Problem

1 Attachment(s)

Hello Evreyone
i make Assassins Creed Origins v1.5.1 with Repack Method by Afr Patch Razor
and get good ratio from 68.7gb ---- 29.3gb
https://i.imgur.com/GKeEZ2b.jpg

and make this settings in innosetup script

https://i.imgur.com/lSaxdhR.jpg

i try to install many times get this error

https://i.imgur.com/90McPes.jpg

what is the solution ???

ffmla

13-09-2018 21:36

Check this solution,May be works

Quote:

Originally Posted by ZAZA4EVER (Post 475647)

Hello Evreyone
i make Assassins Creed Origins v1.5.1 with Repack Method by Afr Patch Razor
and get good ratio from 68.7gb ---- 29.3gb

https://i.imgur.com/90McPes.jpg

what is the solution ???

In your arc.ini section, code for AFR's unpackcmd look strange.
AFR doesn't support stdin/out{AFIK}

Try to change the code to following way,

Code:

[External compressor:afr]

header = 0

unpackcmd = AFR_x64.exe d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

Try it,May works.

KaktoR

13-09-2018 22:52

Code:

[External compressor:afr]

header    = 0

unpackcmd = AFR_x64.exe d #in #out <stdin> <stdout>

is right, it works here without problems (it looks strange because of the stdin/out patch by razor12911).

ZAZA4EVER

13-09-2018 23:19

Quote:

Originally Posted by ffmla (Post 475648)

In your arc.ini section, code for AFR's unpackcmd look strange.
AFR doesn't support stdin/out{AFIK}

Try to change the code to following way,

Code:

[External compressor:afr]

header = 0

unpackcmd = AFR_x64.exe d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

Try it,May works.

i make this ,, setup close when install and disapear !!!!

KaktoR

13-09-2018 23:22

Have you tried with cls.ini?

Code:

[Lolz]

Bufsize=512k

transfer_ReadBufSize=512k

transfer_WriteBufSize=512k

MaxThreadsUsage=100%

MaxMemoryUsage=75%-10m

ZAZA4EVER

13-09-2018 23:38

1 Attachment(s)

such as that

ZAZA4EVER

13-09-2018 23:42

1 Attachment(s)

Get same error

KaktoR

14-09-2018 00:19

Have you tried to test a single .forge file with your settings?

felice2011

14-09-2018 00:37

@ZAZA4EVER .... Well, many times be taken for granted but have you tested the command line archive?

Code:

Arc.exe t -i2 Archive

Also you have tried with this replacement in the decompression arc.ini

Code:

unpackcmd = srep64.exe -d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

or

unpackcmd = srep64.exe -d -s - - <stdin> <stdout>

Code:

unpackcmd = ztool198.exe d:pzlib:t0:cm16mb:b128kb:f - - <stdin> <stdout>

Code:

[External compressor:lolz_x64]

header = 0

unpackcmd  = fazip.exe -i0 decompress:lolz <stdin> <stdout>

Logically fazip.exe and relative *.dll must be compiled and loaded into ISS.;)

EDIT TEST

with some fix in ISS the method extracts perfectly, use "fazip" and the "ztool198" version and see that you solve.:)

https://image.ibb.co/i7xGep/test.png

ZAZA4EVER

14-09-2018 05:59

I edit srep64 in arc.ini
unpackcmd = srep64.exe -d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

Install fine but when arcpackfile.tmp reach to 64gb get this message in pic

Can you upload modify script to test with it

https://nsa39.casimages.com/img/2018...0824623793.jpg

https://nsa39.casimages.com/img/2018...0824172286.jpg

Simorq

14-09-2018 06:07

CLS-Srep.dll Rename CLS-Srep64.dll

No need unpackcmd

felice2011

14-09-2018 06:29

In fact, you also no insert the method

Code:

unpackcmd = srep64.exe -d $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

in the arc.ini file, it is controlled by the dll and not by an executable.

let's see if he can solve in contrary I sending the zipped script.

felice2011

14-09-2018 09:45

1 Attachment(s)

Ok a moment pleaseee…

Copying and pasting you will never learn, at least I hope you will study the changes to understand something.

Logically you will have to recompress and use the same method

Code:

AFR_x64:a2+srep64:m3f:a16:d1g+lolz_x64:tt1

ZAZA4EVER

14-09-2018 14:27

Quote:

Originally Posted by felice2011 (Post 475673)

Ok a moment pleaseee…

Copying and pasting you will never learn, at least I hope you will study the changes to understand something.

Logically you will have to recompress and use the same method

Code:

AFR_x64:a2+srep64:m3f:a16:d1g+lolz_x64:tt1

Thanks Man i tested it on two files for aco
DataPC_22_dlc_patch_01.forge
DataPC_ACE_AegeanCoast_dx11_patch_01.forge

Repack it with your settings and script setup fine thanks

i will test on full game and will tell you

ZAZA4EVER

15-09-2018 21:48

1 Attachment(s)

I recompress full game agian
When setup with your script get this error

felice2011

16-09-2018 01:05

I think the problem is related to the executable or your system, and not to an incorrect configuration of the ISS, I do not know how to help you on this.

The compressor's internal configuration options are only these.

Code:

AFR - [A]nvil [F]orge [R]ecompressor v 0.0.2.0a7 by Edison007.



 Thanks ProFrager :)



Supported engine versions: 

  Scimitar      (Assassin's Creed, Prince of Persia).

  Anvil         (AC II/Brotherhood/Revelations, POP: The Forgotten Sands).

  AnvilNext     (AC III/Liberation/Black Flag/Rogue).

  AnvilNext 2.0 (AC Unity/Syndicate/Origins, Rainbow Six: Siege, Ghost Recon Wildlands).





Usage: AFR.exe command [options] input output



Commands:

  e: Encode input to output.

  d: Decode input to output.



Options:

  -a2      - AnvilNext 2.0 mode [default - disabled].      - encode only

  -vr      - Validate encoding  [default - disabled].      - encode only

  -dc      - Disable lzo-streams check.                    - encode only

  -tN      - Use N threads (1-16, default is NumCPU-1).    - decode only

  -v[0..2] - Verbosity level [default - 1].

wait I send you something to test.

ZAZA4EVER

16-09-2018 01:24

I use afr_64.exe by razor ... Not by Edison007
And in script also by razor

doofoo24

16-09-2018 02:27

for compression use afr:a2 from edison without afrpatch.dll...
and for decompression use the one from razor...

felice2011

16-09-2018 02:38

To compress you have to use the same compressors that I sent you in the zip, and also for decompress.

I created this installer tested for "ACO" with your method in half an hour, you just need to put the archives in the executable path and try.

https://image.ibb.co/fZXNPz/acot.png

Simorq

16-09-2018 06:51

Quote:

Originally Posted by ZAZA4EVER (Post 475712)

I use afr_64.exe by razor ... Not by Edison007
And in script also by razor

XTool 0.9 Support ACO

Code:

[External compressor: xoodle]

header = 0

packcmd = XTool e:precomp:t100p:oodle - - <stdin> <stdout>

unpackcmd = XTool d:precomp:t100p - - <stdin> <stdout>

ZAZA4EVER

16-09-2018 09:07

Quote:

Originally Posted by Simorq (Post 475725)

XTool 0.9 Support ACO

Code:

[External compressor: xoodle]

header = 0

packcmd = XTool e:precomp:t100p:oodle - - <stdin> <stdout>

unpackcmd = XTool d:precomp:t100p - - <stdin> <stdout>

If i use it can get same ratio as afr

felice2011

16-09-2018 09:21

1 Attachment(s)

Use this package to compress the game, tested in compression with the files you sent me, and decompressed with the ISS archive that I sent you on the previous page, if you still have problems, my solutions do not belong to this world anymore.:D

Simorq

16-09-2018 09:56

Quote:

Originally Posted by ZAZA4EVER (Post 475730)

If i use it can get same ratio as afr

Yes and more stable.

KaktoR

16-09-2018 10:01

Quote:

Originally Posted by Simorq (Post 475725)

XTool 0.9 Support ACO

Code:

[External compressor: xoodle]

header = 0

packcmd = XTool e:precomp:t100p:oodle - - <stdin> <stdout>

unpackcmd = XTool d:precomp:t100p - - <stdin> <stdout>

It has problems with big input (look in xtool topic). You will get "write error (disc full)" error.

You have to divide all forge files into 2 halfs, but output will bigger this way then using afr.

Split the forge files in max 25GB

felice2011

16-09-2018 10:15

Quote:

Originally Posted by Simorq (Post 475725)

XTool 0.9 Support ACO

Code:

[External compressor: xoodle]

header = 0

packcmd = XTool e:precomp:t100p:oodle - - <stdin> <stdout>

unpackcmd = XTool d:precomp:t100p - - <stdin> <stdout>

Quote:

Originally Posted by KaktoR (Post 475735)

In this way you only confuse the ideas, it is already 2 days that @ ZAZA4EVER is trying to compress and create an installation, if you change the method and compressors every day, in the end, you choose WinRar as a compressor.:D:D

ZAZA4EVER

16-09-2018 10:17

Quote:

Originally Posted by felice2011 (Post 475736)

hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh :D:D:D:D:D i try more than 22 twice ... i repack game 8 twices

ZAZA4EVER

16-09-2018 12:10

2 Attachment(s)

Quote:

Originally Posted by felice2011 (Post 475731)

Same error ... I am shay from you
There is wrong from my pc can't solve it

KaktoR

16-09-2018 12:34

I have packed the game some time ago with following settings:

Code:

bat file

-mafr:a2+srep+lzma

Code:

arc.ini

[External compressor:afr]

header = 0

packcmd = _Compressors\AFR_x64 e {options} $$arcdatafile$$.tmp $$arcpackedfile$$.tmp

unpackcmd = _Compressors\AFR_x64 d #in #out <stdin> <stdout>

For unpacking use the same files as for packing (stdin/out patch from razor12911)
AFR_x64.exe
afrpatch.dll

All is fine

ZAZA4EVER

17-09-2018 12:19

.......

Simorq

17-09-2018 16:17

https://fileforums.com/showpost.php?...&postcount=406

ZAZA4EVER

18-09-2018 11:14

Quote:

Originally Posted by Simorq (Post 475773)

https://fileforums.com/showpost.php?...&postcount=406

Ok i will test with xtoolv.9(oodle with your dll with c128m). +srep+lolz:d512m
I wish get ratio as afr+srep+lolz

ZAZA4EVER

19-09-2018 15:05

Quote:

Originally Posted by Simorq (Post 475773)

https://fileforums.com/showpost.php?...&postcount=406

Hello Every One
I tested Afr(razor) & Poodle & Xoodle (xtool V0.9+ ACO Oodle Dll By Simorq ) On (DataPC_ACE_Egypt_ext.forge 12.4 GB)
Really i get Results As Simorq Post

Afr(Razor)

https://i.imgur.com/qvcblPZ.jpg

Xoodle (xtool V0.9+ ACO Oodle Dll By Simorq )

https://i.imgur.com/IfMWuHi.jpg

Poodle (Not Supoort ACO )

https://i.imgur.com/ruJ09NX.jpg

Final Size And Results

https://i.imgur.com/MmKsh2u.jpg

////////////////////////////////////////////////////////////////////

But When Test This Tools With The same Settings On This File Of the Game
V1.5.1 .... The File Name (DataPC_ACE_DLC_Thebes.forge=12.2Gb)
The File Release With The Last DLC Of The Game Show Results

Afr(Razor)

https://i.imgur.com/vjiYIm4.jpg

Xoodle (xtool V0.9+ ACO Oodle Dll By Simorq )

https://i.imgur.com/vgtx5U3.jpg

Poodle (Not Supoort ACO )

https://i.imgur.com/o1T4Sc3.jpg

Final Size And Results

https://i.imgur.com/Qw34KML.jpg

I want Say Thing ACO The Oodle Dll By Simorq Dont Support Updates Files After Crack Version 1.2.1 In The Game Dont Unpack Oodle Stream in New Updates File ... So You will Get Bad Ratio For ACO V1.5.1 With Xoodle (68.8GB---35GB)
But If You Use Afr You Can Get Good Ratio (68.8GB---29.3GB)
I Think Oodle Dll (ACO_oo2core_4_win64.zip) Want To Update To Unpack New Updates Games Files

Thanks For Help All

doofoo24

11-10-2018 08:14

fun recommendation

1 Attachment(s)

just tried your script for inno...
GTX 1080TI does not meet the minimum requiremAttachment 23274ents :D

KaktoR

11-10-2018 08:42

Because old library cannot handle new hardware.

Use ISSysInfo.dll by peterf1999

Rushige

20-10-2018 14:54

I am completely new to this compression and all, but would like to know as to how to extract just this .bin file from the new Fitgirl repack of this game. fg-selective-japanese.bin.

pakrat2k2

21-10-2018 15:57

Rushige, first only warning, we do not suppost warez. That means group names, release names, etc.

You want info from her repack then goto where she posts them & ask her. Highly doubtful that you will get any help for that.

Rushige

21-10-2018 21:56

Quote:

Originally Posted by pakrat2k2 (Post 476489)

very sorry. thnx for letting me know abt this.

ZAZA4EVER

23-10-2018 14:24

Quote:

Originally Posted by KaktoR (Post 476262)

Because old library cannot handle new hardware.

Use ISSysInfo.dll by peterf1999

Thanks Kaktor ... I use it from your asis installer and work fine

yasitha

12-01-2019 09:01

Don't use AFR on new Assassin’s Creed Games, cause they are compress by oodle...
So please use oodle...

AHMED SAMI

10-02-2019 03:50

What about free space on the hard drive

All times are GMT -7. The time now is 09:35.

Page 1 of 2

Show 40 post(s) from this thread on one page