bad laser?

[eakinsme]

ok guys.. i got a ps2 i was modding as a favor for a buddy.. i boot it and make sure it works ok and it goes to browser and boots games dvd games and boots cd games b4 getting to teh browser..
i dont think much about this and then i go in and mod it.. reads cd-rs fine but no dvd-rs.. remove the chip and now it wont read dvd format games.. it still reads cd games tho.. i go in and turn the dvd laser pot from 1300-1060 (or around there).. Retry and same thing happens.. no dvd games but all cd games!!

Any ideas? PS: not really wanting to spend much on a new laser since i just got a huge speeding ticket and was doing this as a favor.. the ticket will leave me with about $5 in my bank.. so im looking for cheap solutions!!

[spedmetal]

Yupe sounds like your laser. You could try taking the dvd pot down a little more but dont go below 800. Also why would it be your responsibility to by the guy a new laser. Sounds like it was on its last legs anyway.

[eakinsme]

well i did it for a friend and told him i wud mod it for him.. then i said that the laser wasn't good enough to read dvd-rs.. he said ok then just take out the modchip.. now it wont read any oringals!!

[spedmetal]

Well that sucks but it still sounds like he originaly had a crappy laser.

[dust2dust]

sorry but must disagree

laser read origanals without going to browser before modding
theres nothing wrong with this laser, better test is dvdr movie
if not read dvdr then possible laser but not read origanals its a install fault

check for shorts
lol if u can be bothered to search charlies old trouble shooting guide even told u most like points to check for no dvd

[spedmetal]

sorry but must disagree

laser read origanals without going to browser before modding
theres nothing wrong with this laser, better test is dvdr movie
if not read dvdr then possible laser but not read origanals its a install fault

check for shorts
lol if u can be bothered to search charlies old trouble shooting guide even told u most like points to check for no dvd

I knew he was alive ... told you told you!!!

Anyway dust you are wrong I see originals go to the browser all the time bud.... WITH OUT a chip even installed. This is a dead ringer for a weak laser.

[eakinsme]

anyone know where i can get one really cheap.. dont need brand new.. just need sumthing good and cheap!
EDIT: Nice to see you back again dust!! Great guy!

[dust2dust]

i stand by with my origanal statemement
what caused the laser to stop reading origanals ? :rolleyes:
i glad i never seen ps2s like this

good to see u all :D


ok guys.. i got a ps2 i was modding as a favor for a buddy.. i boot it and make sure it works ok and it goes to browser and boots games dvd games and boots cd games b4 getting to teh browser..
i dont think much about this and then i go in and mod it.. reads cd-rs fine but no dvd-rs.. remove the chip and now it wont read dvd format games.. it still reads cd games tho.. i go in and turn the dvd laser pot from 1300-1060 (or around there).. Retry and same thing happens.. no dvd games but all cd games!!

Any ideas? PS: not really wanting to spend much on a new laser since i just got a huge speeding ticket and was doing this as a favor.. the ticket will leave me with about $5 in my bank.. so im looking for cheap solutions!!

[dust2dust]

u wasting your cash dvd still wont read

anyone know where i can get one really cheap.. dont need brand new.. just need sumthing good and cheap!
EDIT: Nice to see you back again dust!! Great guy!

[eakinsme]

ive checked the points and everything looks good tho.. it will still read cd based games!

ALSO: Mod chip is removed completly!!

[dust2dust]

many installs wiil read cd not dvd or read dvd not cd , certain pions control cd others dvd

answer me 1 question then i listen to laser died? what stopped the laser from reading origanals? here u go i answer for u , u installed and removed a chip.
common sense says install caused problem, faulty install chances killing dvd not cd is very slim, the chances of shorting something stopping dvd from working are quite possible


ive checked the points and everything looks good tho.. it will still read cd based games!

ALSO: Mod chip is removed completly!!

[dust2dust]

eakinsme u got a good quality digi camera?

[eakinsme]

i did check most of the points that were even close to being questionable with my mulitmeter for continuity and they were all good.. i adjusted the laser to see if that helped and it didn't!!

PS: CAM IS A 2mp cam!!

[dust2dust]

believe me it aint laser died, if it did it was due to install fault
before buying 1 try 1 from another ps2 if u can it will save u cash

2 million could be ok, take a picture, highest quality macro, of each area u solder to email them to me
i will pm u my email, i hope u have broadband
bios 1 from each side of legs, or 1 pads 1legs depenging what u use

[Hull_chipper]

Hey Sped, is seaney 'ask 3,000 annoying questions a day' B still around?

[dust2dust]

come on m8 at least make your opinion on this

you are an english , i sure u not get it wrong ;)

Hey Sped, is seaney 'ask 3,000 annoying questions a day' B still around?

[Hull_chipper]

This argument is going just fine.................. I'll stir it up again when it fizzles out :D

[spedmetal]

Hey Sped, is seaney 'ask 3,000 annoying questions a day' B still around?

No he hasnt been around but with the resent appearances of you two and BG I would not be surprised if his ass shows up too.

[Hull_chipper]

Lol at the thought of him bugging the hell out of another forum :D :D :D

[dust2dust]

i not trying to cause an argument just trying to save eak some cash and time
if he gets new laser he still have same problem

[eakinsme]

i not trying to cause an argument just trying to save eak some cash and time
if he gets new laser he still have same problem
thanks dust.. i added you to msn!!

[dust2dust]

maybe u could keep the ps2 for a while
when i next visit my relatives in port hope i could come visit u
were abouts are you , could be this year could be the next or the next

[Hull_chipper]

As the laser was working fine before hand but now isn't, I'd take a look for damage around the CD/DVD controller. Which version is this Eak? But as Sped has already said, this is an old machine & we've all seen them working fine one minute & fubar the next. Human excrement happens as they say.

In future Eak check the machine with a DVDR movie before modding.

[eakinsme]

its a v7.. yo dust.. when u come down to port hope we are goign out for a beer man!!
i like meeting up with other modders..
Hopefully im 19 or at least have my fake id by the time u get down here!!
LOL
17 year old modder i know man..

ALSO: Im more reconized under the name Eaks on many other forums.. u can call me that if u want boys!!

[dust2dust]

Hey Sped, is seaney 'ask 3,000 annoying questions a day' B still around?


lol look at the email i just recieved

" From : Sean Beacham <seaneyb**********com>
Sent : 06 December 2005 01:17:30
To :
Subject : Join me on Bebo

| | | Inbox


Hi

I'm using a service to share my photos and stuff, please click below to av a laugh with me and see all my photos:

http://www.bebo.com/in1/4539439a2554414b72622700c84935105d133

Bebo also has full profiles with a lot of fun features, try it and let me know what you think.

Sean
x x x



anyone care to jion him ?:o

[daniel[ro]]

from my point of view the dvd laser is dead
i had the same problem. i had to change the lens head
when you change it you should have the head with the serial as your console otherwise it won't work and you can destroy the second lens head as well