PDA

View Full Version : V10, Duo2, but no Backup-ps2 games running..?!

Ernieboy0021
19-01-2005, 13:00
Hej!

I chipped my v10 machine with a DUO2 chip, and backed up Ps-one, and DVD´s are running without any probs. But If I want to boot PS2 games it gives me a DISK READ ERROR?! What should I do? May adjust the lense? Please help me!!

THX
Warlock
19-01-2005, 15:06
Recheck the install, you got a loose wire somewhere.
Ernieboy0021
20-01-2005, 04:39
THX! I will check!!
Ernieboy0021
20-01-2005, 05:05
Checked! No loose wire?! How can I check if the wires are soldered on right? I think i´ve readen that I can check it with a Multi-Meter?! If yes,... how?! *lol*
Ernieboy0021
20-01-2005, 07:09
OOhps! There really was a less wire! So i soldered on it again! Now i´ve got a black&white screen, and the drive will not start spinning! What can I do? What have I done? :(

THX Ernie
Ernieboy0021
20-01-2005, 11:05
Warlock help me pleeze :(
lufcfan
20-01-2005, 12:54
Check all points with a multimeter

Check BIOS pins etc for bridges

If all else fails, take out the install and start from fresh. Maybe posting a picture might be useful if you have one...
Warlock
20-01-2005, 15:38
Check all points with a multimeter

Check BIOS pins etc for bridges

If all else fails, take out the install and start from fresh. Maybe posting a picture might be useful if you have one...
Exactly, If your booting PSX backups then you got the the power, ground, SCEX and reset correct. Check everything else.
Ernieboy0021
04-02-2005, 11:27
Thx Guys, i´ve sold the problem! There was 2 wires touching another! *lol*
TylerDurden
04-02-2005, 17:24
That would do it.




Tyler!