View Full Version : R-Mod no Solder mod chip
Kayliebug
21-01-2003, 23:08
I just installed a R-mod no solder modchip in my PS2 version 5.
I have a gameshark version 2.01 or above.
I selected a code and did everything right but when I go to hold in the eject button the reset light turns orange and makes a noise but the tray does not open.
What am I doing wrong.
Either one of the ribbons is not in properly or the chip is faulty, check the ribbons, if they are in ok then looks like u may have a faulty chip.
I have come across this sort of thing before and usually it is a sign of a faulty chip. Sorry to be the barer of bad news but that is what it sounds like.
lufcfan: sorry, but no, you're wrong. given the information that the eject light turns orange, the chip is operational.
kaylebug: its most likely one of the little 'plugs' have come out..
i had a no-solder mod in my v4, and the little cable often gets disconnected. they can easily get caught on the metal case and fall out. check it again, and try to push it in there as firm as possible.
Kayliebug
22-01-2003, 22:29
I have tried it several times. I even tried it with the case open so I could see that the cables were seeded tight.
What else could it be?
you have the wrong version No-Solder mod?
there are 2 different ones, one for v4 and one for v5/v6 (or is there 3, 1 for v4, v5, v6 ?).
Kayliebug
23-01-2003, 18:15
I have the right version which fits version 5 and 6.
Version 4 is a totally different chip and would not even fit in version 5/6.
Any more help out there?
Preyhunter
23-01-2003, 23:50
I'm having the same problem with my brother's PS2. After holding down the eject button for a few seconds, it makes a high pitched whistling sound, pauses for about 3 seconds, then makes the sound again. The sounds occur when the tray is SUPPOSED to be ejecting and going back in. I removed then reseated the chip and both ribbon cables, but that did not help. Everything else functions as it should. A quick press of the eject button ejects the tray and another makes the tray go back in. All originals still play as normal. Swap Magic discs do as they are supposed to. This leads me to believe that the chip itself is faulty. His is a version 5 as well. The chips we received are good for V5/V6/V7. The same version chip works fine on my V7, though I have not tried his chip on my machine. Kinda don't want to mess with mine since it's working, though that may be the only way to tell for sure whether it is the chip or not.
Kayliebug
24-01-2003, 04:16
That is exactly what my machine does. Where did you get the no swap chip. I got mine at console source.
I am going to exchange it and see if that helps.
LUFC fan was correct, Sounds like faulty chip.
The fact that the light turns orange does not mean that the chip is 100% When the chip is flashed it's most likely come under errors.
Here's food for thought, If you plug a fridge in and the light comes on when you open the door, does that mean that the fridge is working?
Sorry, I just h8 people that start the YOU ARE WRONG statements. :D
Preyhunter
24-01-2003, 07:34
My chips came from GameGizmo. Will be calling them today to see what can be done about the one that's giving me problems.
Preyhunter
24-01-2003, 09:52
Just got off the phone with a support guy at GameGizmo. I explained to him that everything works as it is supposed to EXCEPT for the "exchange eject" function of the chip. He said it sounded like a defective chip. He's supposed to be emailing me now with RMA instructions for replacement.
Kayliebug
24-01-2003, 15:51
Thanks for the info. I just requested an RMA number today from Console Source. I will let you know when I get my new chip. It might take a while since it is from Canada.
Let me know how yours comes out.
Thanks agian
NightStalker
24-01-2003, 16:28
I have seen this alot. If the ps2 will do a normal eject with the chip installed but not open when you do the r-mod swap then the chip is bad, if it was the ribbon cable or plug then it wouldnt eject at all.
Kayliebug
24-01-2003, 18:09
Why do you think so many are bad. I don't want to get another bad one. Don't they usually test them before they send them out.
elkayps2
24-01-2003, 18:36
and still ppl wonder why messiah chips are better?
wait till your no-solder stuffs your ps2 dvd laser beyond repair, then on your next PS2 you will get it done properly with Messiah/Magic chips
"Speaking from experience"
And I was right ALL along! :p LOL!
Kayliebug
25-01-2003, 18:09
What does everyone think about the flip cover with swap disc?
I am thinking about getting one instead of the no-solder mod.
Thanks
They suck, I think you are going to waste more money if you buy this crap. Do yourself a favor and get a no swap chip.
UrrBodyH8sMe
05-02-2003, 12:52
yes i do the swap like the instortions said 1 load gs to main screen i do that 2 open tray take out gs2 put in a dvd game i used DMC and GTA i close tray and re open is there a cereten time limt in which u have to leave game in the system 3 i wait 15 to 30 secs then close tray 4 i goto start game with/without codes i hold eject button (5) secs tray opens and lights flashing orng and green i put copy in of vice city made useing primo dvd with tobisha dvd-r/rw and tray shuts by its self then i hit x and thats it it just locks up wont try to load or anything makes some nosie like lasers moveing but wont load any one have any ideas on this problem
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.